photoview 360 - out of memory / not enough memory for rendering

[dedoitalia]

Hello
I wanted to know why when I make a rendering with photoview 360 2010 sp5 after 10 seconds rendering I get type errors:

- out of memory
- not enough memory for rendering

What's the matter?
My computer consists of:
i7 920 (8 cores) + 12 gb ram 1600 + ati readon 5770 hd 1 gb
windows completed 7 64bit

is a video card memory problem (I would need to change video card with 2 or 3 gb ram) or computer ram memory?
What memory are you talking about?
How do I solve this?

 

[SolidUser]

Hello
I wanted to know why when I make a rendering with photoview 360 2010 sp5 after 10 seconds rendering I get type errors:

- out of memory
- not enough memory for rendering

What's the matter?
My computer consists of:
i7 920 (8 cores) + 12 gb ram 1600 + ati readon 5770 hd 1 gb
windows completed 7 64bit

is a video card memory problem (I would need to change video card with 2 or 3 gb ram) or computer ram memory?
What memory are you talking about?
How do I solve this?

is solidworks 64-bit?

 

[dedoitalia]

is solidworks 64-bit?

si - solidworks 2010 sp5 64bit

but the problem is that photoview 360 sp5 is 32bit for the 2010 version

therefore cmq he loads and processes to 32

 

[SolidUser]

1) try simplifying your set
2) reduce the quality of your rendering
3) use photoworks that is 64-bit
4) passes to solidworks 2011, where pv360 is 64-bit

I read about issues with applied textures and if removed they solved the problem, but with your sp5 the problem should not arise....intensive.

 

[dedoitalia]

1) try simplifying your set
2) reduce the quality of your rendering
3) use photoworks that is 64-bit
4) passes to solidworks 2011, where pv360 is 64-bit

I read about issues with applied textures and if removed they solved the problem, but with your sp5 the problem should not arise....intensive.

the big problem is that we worked 1 year at the project and now I have to "simplify it". . Unfortunately I cannot, you should see our project is really a complicated thing is a whole production line with thousands of pieces. .

cmq as I make with photoworks, it does not work as pv360
renderings are much worse.

appearance tips

 

[SolidUser]

the big problem is that we worked 1 year at the project and now I have to "simplify it". . Unfortunately I cannot, you should see our project is really a complicated thing is a whole production line with thousands of pieces. .

cmq as I make with photoworks, it does not work as pv360
renderings are much worse.

appearance tips

pw is not worse than pv360, you definitely do not know how to use it.
solutions are those proposed.

 

[Mike1967]

the big problem is that we worked 1 year at the project and now I have to "simplify it". . Unfortunately I cannot, you should see our project is really a complicated thing is a whole production line with thousands of pieces. .

cmq as I make with photoworks, it does not work as pv360
renderings are much worse.

appearance tips

I am not at all well with this integrated pv.
the quality of renderings is true that they are worse, in fact they are
bragged to have streamlined the render.. and in fact you see...:
sin.
for your problem, you can't create visualization states where you hide
Are the parts not visible in that particular frame?
you should streamline the oparation of render.

 

[AntonioV]

- out of memory
- not enough memory for rendering

what happens if you set a swapfile fixed fixed fixed da 2x12=24 gb in windows?

better if you create it in a small dedicated partition of the hard drive, resetting automatic swapfiles on other partitions.

:

 

[dedoitalia]

what happens if you set a swapfile fixed fixed fixed da 2x12=24 gb in windows?

better if you create it in a small dedicated partition of the hard drive, resetting automatic swapfiles on other partitions.

:

what you mean by fixed swap I have a swap of 20 giga
but cmq I have 12 gb of ram and arrival to 3.3 occupied so remains very free
So I don't think it's a swap question
cmq I can not even change the display states the system I must render it in full

I don't know how to do any of you made rendering with 2011?

cmq photoworks makes veramete shit the only decent is photoview 360 but fails in this enterprise

 

[Mike1967]

what you mean by fixed swap I have a swap of 20 giga
but cmq I have 12 gb of ram and arrival to 3.3 occupied so remains very free
So I don't think it's a swap question
cmq I can not even change the display states the system I must render it in full

I don't know how to do any of you made rendering with 2011?

cmq photoworks makes veramete shit the only decent is photoview 360 but fails in this enterprise

Yes, some make I did, but on assemblies of 100-120 megabytes.
Do you have a chance to try on a car without ati?

 

[dedoitalia]

Do you have a chance to try on a car without ati?

Don't you think it's a video problem?

 

[Mike1967]

Don't you think it's a video problem?

Look, with PCs everything can be.
I try to throw it there: and sufficent a failed memory bench to stay on foot.
try to remove a counter at a time (if it fits into your skills), maybe
The problem is that.

 

[dedoitalia]

Look, with PCs everything can be.
I try to throw it there: and sufficent a failed memory bench to stay on foot.
try to remove a counter at a time (if it fits into your skills), maybe
The problem is that.

the memories are all new and I did the tests of quiet memory
The problem is I don't know what a mistake it is....

 

[cacciatorino]

what you mean by fixed swap I have a swap of 20 giga
but cmq I have 12 gb of ram and arrival to 3.3 occupied so remains very free
So I don't think it's a swap question
cmq I can not even change the display states the system I must render it in full

I don't know how to do any of you made rendering with 2011?

cmq photoworks makes veramete shit the only decent is photoview 360 but fails in this enterprise

if the process of rendering is performed at 32 it, it can address to the maximum 2^32 bit or: 4 gb of ram, even if the opertative system is 64 bit. then being studied for 32-bit windows, it's likely that more than 3 gb can't address it anyway, even if you run it on a 64-bit system.

As you were told, you should check if you can use a 64-bit version of the application.

 

[dedoitalia]

if the process of rendering is performed at 32 it, it can address to the maximum 2^32 bit or: 4 gb of ram, even if the opertative system is 64 bit. then being studied for 32-bit windows, it's likely that more than 3 gb can't address it anyway, even if you run it on a 64-bit system.

As you were told, you should check if you can use a 64-bit version of the application.

but when it exceeds 4gb should not rely on a disk swap for rendering?

 

[dedoitalia]

but when it exceeds 4gb should not rely on a disk swap for rendering?

I don't understand. but when from the error out of memory of which memory speaks ram of the computer, disk swap or the integrated one of the video card...

my card is a hd 5770 1gb 128 bit

Would it be better for a 256bit? What's the difference?

 

[SolidUser]

read more here..
the rendering process leans on the cpu which in turn puts the data on ram memory.
swap is used to transfer application data not in use or data that can be transferred to the disk.
In your case no, you need ram memory.
your rendering video card, at the moment it doesn't need anything.
the video card is an interface device between the pc and the monitor.
in fact one that has the integrated video card but a good cpu and fast ram can put us less time than one that has a pc with lower cpu but higher video card.
until the software does not allow the use of gpus, the video card for rendering does not serve anything.
Is it a problem to install sw2011 sp2?
explain to him that for the work you have to do you have to have 64-bit pv360.

 

[dedoitalia]

read more here..
the rendering process leans on the cpu which in turn puts the data on ram memory.
swap is used to transfer application data not in use or data that can be transferred to the disk.
In your case no, you need ram memory.
your rendering video card, at the moment it doesn't need anything.
the video card is an interface device between the pc and the monitor.
in fact one that has the integrated video card but a good cpu and fast ram can put us less time than one that has a pc with lower cpu but higher video card.
until the software does not allow the use of gpus, the video card for rendering does not serve anything.
Is it a problem to install sw2011 sp2?
explain to him that for the work you have to do you have to have 64-bit pv360.

but in 2011 pv360 is in solidworks which I do not like very much it is true that in 2 months they have pulled out already 2 sp = instability and problems

 

[SolidUser]

but in 2011 pv360 is in solidworks which I do not like very much it is true that in 2 months they have pulled out already 2 sp = instability and problems

thesp1 came out for improvements of pv360 that failed to insert in the sp0.
S2 came out two weeks ago.
we are in the norm of recent years.
integration needed, maybe they didn't have to remove the possibility of rendering without sw.
However with sw you can do an integrated preview or with separate window.
the final rendering is pv360.
However the solutions have been given to you.
do what seems right to you.

 

[reggio]

Is it a problem to install sw2011 sp2?

... ... ...

It's a beta for the test before the sp[cut] final.
I think you should be enrolled in the beta tester program to install it.Like every beta, there's a risk of instability. and I appreciate you giving information about what goes or not in the version.