360° writing on cylindrical surface

[Marafranco]

Hello, my name is gorea,
I have a problem with the projection of a writing around a cylindrical surface, I just can't bring it back.
on one floor it is all quiet and uncomplicated, but on 360° the thing is very difficult to me.
If you can? Thank you very much

 

[Vittorio]

If I understood correctly... but what do you mean by 360° that wraps the whole cylinder?


Anyway... the proceeding is identical to the writings in plan.

 

[Vittorio]

ps:
even easier, you can avoid the assembly

 

[Marafranco]

Yes, that's it, thank you very much in a bit I try and let you know, you were very kind, thank you.

 

[Marafranco]

If I understood correctly... but what do you mean by 360° that wraps the whole cylinder?


Anyway... the proceeding is identical to the writings in plan.
View attachment 68562
View attachment 68563
View attachment 68564
View attachment 68565

I tried to do so, but it does not solve my problem, because if the writing is longer and you have to wrap around the cylinder does not work

 

[Vittorio]

In fact.. I suspected you wanted to wrap the writing on the cylinder.
In this case you need the freestyle or generational shape design advanced module, which I do not have.
or the application for writing, but it is a software apart that is called type3

 

[Marafranco]

In fact.. I suspected you wanted to wrap the writing on the cylinder.
In this case you need the freestyle or generational shape design advanced module, which I do not have.
or the application for writing, but it is a software apart that is called type3

I have these modules. type3 I've heard about it, a really practical software that solves this kind of problem but I don't want to spend any more money. Let's see if someone else can help me.
cmq vittorio thank you

 

[dalmott]

In fact.. I suspected you wanted to wrap the writing on the cylinder.
In this case you need the freestyle or generational shape design advanced module, which I do not have.
or the application for writing, but it is a software apart that is called type3

If it can help you, I did this before I type3.
1- save the text in dxf
2- develop the target sup
3- make a sketch on the same floor of the developed sup
4-transfer the sketch from the top to the fold.

if not mistaken, the development function is a copy-paste function, you do not need to have the module

 

[Vittorio]

ciao @dalmott .
I have always done as you have specified, export to dxf in order to have the profiles of the writings.. etc. etc.
sincerely I have never had to develop a written as from title discussion and writings I do even very few not to consider type3
But now you have me curious.
I was convinced that it needed an advanced license.
If you have some time.. Can you explain how the procedure is?
Maybe helping me with images that indicate the icons to use?
Thank you in advance

 

[Marafranco]

you would help a lot, the only hand I ask you is to make a writing that takes more than half the circumference

 

[dalmott]

In the current company I do not have a development license, I should see if I have a file of suppliers where the command is present.
if you find a file where the command "develops on the floor", copy it to other files, without having to have the license, the command remains editable.
using guide images
creates the development of supcreates a sketch with the written lying on the development plan,
back to edit the function "develop in piano"select the sketch, and be careful to select in the bottom right "piega"in this way transfer the writing to the original sup

 

[Vittorio]

As I imagined, I don't have this license.
Thank you very much @dalmott

 

[Marafranco]

Thank you. @dalmott as soon as possible I try and let you know

 

[dalmott]

I found the function in a vendor file.

 

[Vittorio]

Thank you very much @dalmottYes, to create it I don't have the license, but I can still edit an existing file

 

[Marafranco]

Maybe I had the r31.. I hope I can do it according to your guide. cmq thanks to all.I will let you know as soon as possible if I can

 

[Marafranco]

guys I did the test and unfortunately I couldn't, I would need a simpler and more detailed tutorial, take my ignorance. If someone can help me in a more simplified way (even privately) I would be grateful, I don't want to take advantage of your patience

 

[Vittorio]

guys I did the test and unfortunately I couldn't, I would need a simpler and more detailed tutorial, take my ignorance. If someone can help me in a more simplified way (even privately) I would be grateful, I don't want to take advantage of your patience

I'd love to help you, but I don't have a license.

 

[Marafranco]

@dalmott If you could do a tutorial like what did victorious, maybe with more characters you would do me a favor, you can send it to me privately without problems, if you don't do anything, thank you cmq

 

[Vittorio]

the ideal would be that @dalmott put it to everyone's provisions.
This is the spirit of the forum.