• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

2 plots

  • Thread starter Thread starter re_solidworks
  • Start date Start date

re_solidworks

Guest
Bye to all,

I sell for inutilizzo two plotter hp perfectly working.

the first is a designjet 350 c a0+ with original support, roll feeder and manual cutter (there is no automatic cutter). the plotter is in perfect state of operation, apart from the color cartridges that I never use. I replaced the belt and performed a general cleaning about 2 months ago, I would say it is perfect. I would like to total 300,00 euro + VAT. I warn you that for this model there are no official hp drivers for operating systems after xp, therefore xpx64 - view and seven work only with windows drivers. could be optimal for those who need a plotter a0 and uses xp again for a while.

the second is a designjet 100 a1+ with drawer + sheet loading. I used it very little and it's perfect. That's why there are drivers for 7 so we're going on a lot. of this I would like to total 450,00 euros + VAT.

for both I did not consider the shipment and would recommend the withdrawal by hand, if expressly requested the shipment I will communicate any expenses. for both I have to issue invoice, therefore they will be deductible. the plotters are not in guarantee

Hi.
 
100, if as I think it's version 100 plus, I might be interested. I have one that has always given me problems and if your works would be willing to treat the purchase even if the requested amount seems a little high for the value of the machine and considering that at the same amount the assistance restores me completely.
 
Marcogeo said:
100, if as I think it's version 100 plus, I might be interested. I have one that has always given me problems and if your works would be willing to treat the purchase even if the requested amount seems a little high for the value of the machine and considering that at the same amount the assistance restores me completely.
Click to expand...
It is a designjet 100 and not a 100 plus, the hp code is c7796a. for the figure you can talk about it but I am not willing to lower it so much because the conditions of the machine are practically equal to the new.
 
re_solidworks said:
It is a designjet 100 and not a 100 plus, the hp code is c7796a. for the figure you can talk about it but I am not willing to lower it so much because the conditions of the machine are practically equal to the new.
Click to expand...
I have to check but if I don't remember the 100 doesn't have the possibility to be used with mac and this would preclude me from treating the purchase.
the fact cmq that is a lower version (though similar) to what I have reduced my interest because with that money I set my own. I understand your legitimate expectations (I would do the same I was in your shoes) but, driver allowing, to those figures does not do to my case. If I wanted to sell mine and with a little extra money I could take a new one.
but your offer is extremely advantageous for those who do not have a plotter and want to have one at an affordable price.
 
I was able to make the dj350c work on win7 x64, so I decided to keep it. the 100 is available as an insertion.
 
"Directive, I managed to run on win7 x64 the dj350c, so I decided to keep it. the 100 is available as an insertion. "
Sorry that driver you used? ?
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top