3d model for ball recirculation sleeve

[c._mauro]

I would like to know if any of you have a 3d model for a ball recirculation sleeve (which in my toolbox libraries is not there).
something like this to mean to us: http://www.tracepartsonline.net/%28s%285ytj4i45f5fq0pmglb4qig55%29%29/global/part.aspx?partid=10-20102008-076506&sk_reference=thanks to those who will prodigal to help me.
Mauro.

 

[meccanicamg]

Hello, Mauro,
The ball sleeves exist on traceparts where you've linked, I think something's up www.3dcontentcentral.com.

If you don't need things with the drawn spheres, I'd say you could make a model with the configurations like I did. using the ina ones I looked at the cards and I made some hollow cylinders. I should also have a pattern around with the balls drawn and I would say that even that is not difficult to do, just make 4 rows of balls parameterized according to the length of the sleeve.

There are no swx toolboxes.

 

[cacciatorino]

If you don't need things with the drawn spheres, I'd say you could make a model with the configurations like I did. .

I've done it like you, too. I've modeled them parametrized. otherwise see the page of the ina:
http:/medias.schaeffler.de/medias/it!hp.ds/;a8bj7ka7x2w6?pattern=kh

 

[c._mauro]

perfect, I see what is in the links and at the most I follow the advice on the configured model (as I really intended to do, but of course I confirm by professionals help to understand that you are doing the most right way).