add threads which table

[MARCOC]

hi to all, I would like to add a filettaura that is missing in standard list, I know where we fit into the toolbox, but I do not find between the thousand positions, what table I have to update or better to which table points when in a part I insert the thread through the command "cosmetic hairstyles"
Does anyone know what and in the toolbox?

I have tried 4 or 5 but nothing

 

[MARCOC]

I believe I have understood that in the toolbox... only the holes are handled that are used through "creation wizard holes" and not those that come from "cosmetic hairstyle"...so where can solid those data?

 

[MassiVonWeizen]

topic already discussed in the forum

 

[MARCOC]

as I wrote regarding the holes performed by "creation wizard holes" you enter the toolbox and add them to the various tables what you need

but as for the command "cosmetic hairstyle" I did not find the table at which point

I added to all the tool-box the thread I needed, but from " cosmetic thread does not appear

 

[MassiVonWeizen]

did you search the forum?

 

[MARCOC]

but they all talk about the creation of holes... at least the ones I found.

 

[MARCOC]

I tried to create a custom library, in which I left a single thread m25x1.5
but then actually in the part even if I select my librera as you can see from image, solid proposes me a lot of threads but not m25x1.5, then cosmetic threads do not depend on the toolbox

Can anyone help me?

 

[MassiVonWeizen]

Cos'è una filettatura cosmetica in SolidWorks | TS Nuovamacut

Le filettature cosmetiche servono a descrivere gli attributi di un foro specifico o di un perno filettato. Scopri i passaggi per aggiungere e aggiornare le filettature cosmetiche agli standard SolidWorks.

www.nuovamacut.it

https://support.hawkridgesys.com/hc/en-us/articles/115003696692-adding-custom-cosmetic-threads

 

[MARCOC]

I had seen the solid article, but he says contact technical support. .
thanks to all
but I renounce...I can't customize the thread...so I proceed with a written note manually

 

[MassiVonWeizen]

apart from there are two links, if you need one tantum you can also put nobody in thread type and then below you write the text

Filettatura cosmetica come aggiungerla?

Salve a tutti, ho un quesito: su di un albero Ø30 voglio aggiungere una filettatura cosmetica M30x1,5 , negli standard proposti non c'è, ma ci sono solo i passi più grandi, come faccio ad aggiungerla? Premetto che ho già provato nella toolbox, ma si riesce a personalizzare solamente il foro...

www.cad3d.it

 

[MARCOC]

I wanted to ask for a delucidation, but why with the cosmetic thread command, if I select a tree or hole for example diameter 20, he proposes me any thread size? in the list puts me m8 m12 etc etc....do you not recognize the starting diameter? Can someone explain how I'm in charge?

 

[TETRASTORE]

I would like to add a filettaura that is missing in standard list, I know where we fit into the toolbox, but I don't find between the thousand positions, what table I have to update or better to which table points when in a part I insert the thread through the command " cosmetic threads"

I don't know if you've already seen the directions in the following blog and if you can be useful:addition of cosmetic threads.

 

[MassiVonWeizen]

I don't know if you've already seen the directions in the following blog and if you can be useful:addition of cosmetic threads.

is the same link that I entered, but it is not good; the other link you do not know if you read it and not even if you did as I indicated later, i.e. not put any kind of standard and fill in the various items by hand.

Does he propose any thread size? in the list puts me m8 m12 etc etc....do you not recognize the starting diameter?

and it is so hard to expand the curtain and select the correct one?

 

[MARCOC]

I asked if anyone knows how to tell me how the command is.

 

[MassiVonWeizen]

and in the meantime you keep not answering if with the second link of the post#8 or with that of the post #9 you managed to solve.

 

[MARCOC]

I have already answered read the post 9...beam manually

 

[Gatti_e]

Good morning. I wanted to know if in the meantime you managed to find a solution on "how to add custom threads to the list of cosmetic thread (not hole command)". it would be very convenient to have them without overwriting (it leads to a lot of problems overwriting). the post was a disaster, you just quarrelled without finding a solution.
Thank you.

 

[meccanicamg]

create your own standard, copying what you usually use.
When you go to the laminated holes for example, you usually have 3 tables including those related to the male tree.
I added about 400 holes with related cosmetics for machine work, following an old post published with a huge hole database.
If you are looking for it on the forum you find it.