advice on assembling

[themole]

good morning to all, I posted a box with its lid drawn from a project of my colleague.I can't make the lid fit above as the once assimilated must remain tilted.I gave the bond in the lower part but being spiovente I can't let it sit in the upper part so as to form a cornice on the front of the box.where am I wrong and why?
thanks to those who answer me... and help.save

 

[Mec_1802]

Hi.
I took a look at your set, but didn't I understand what you have to do?? ? .....also because it does not fix any pieces to the plans of origin of the assieme and do not match the views then the assieme is free in space and you do not understand which is the front ....retro.....sx....ecc....ecc!!

 

[themole]

excuse ignorance but how do you fix the pieces to the plans of origin?

 

[rf.infissi@libero.it]

simply by binding the plan of the together with the plan of the plotting part for all three floors

 

[Mec_1802]

excuse ignorance but how do you fix the pieces to the plans of origin?

the indication of RF.infixes is right
practically ties the work plans of the assieme with the work plans of the part in such a way that when selecting the views from the "cubo" actually correspond to the views of your pz, that is frontal view with the front of the pz view dx with dx of the pz.... and so on!
As for your set I think there is something wrong, i.e. the "top container" has been created with a face and then with a series of flanges that make up the "cover edge, the "flangia 5" should have a fold equal to the inclination you have on the "container wrap" (i.e. 92,06) so that when you go to bind the top container remains tilted.
I also suppose that the holes you have on the edge of the "top container" you will have to give them back because so I think they do not match those of the enclosure!