bevels and roundings as working together (wf4)

[mandorlim]

Hello, everyone.
an information... but with pro/e wf4 it is not possible to add bevels or roundings (collections) as working together?
Do I have to do extrusion or revulution work by creating my sketch... or are I missing something?

Thank you.

 

[maxopus]

that you cannot do to me, you have to activate the part (right-click) to achieve the bevel or rounding.

 

[Parametric_Ozzy]

Hello, everyone.
an information... but with pro/e wf4 it is not possible to add bevels or roundings (collections) as working together?
Do I have to do extrusion or revulution work by creating my sketch... or are I missing something?

Thank you.

not as joint processing but as it has correctly indicated maxopus, part processing in the context together, this because bevels/races are technical features and mainly use edges that have different ids for each component and also can add material and besides removing and additions of material as joint processing are not possible.

How come you have this need?

 

[mandorlim]

thank you for the kind answers.
the need arises from the fact that I have the details a and b, each with their table.
These parts must be combined with each other and additional parts are made.
There is therefore a code c that includes a and b, all here.
Thank you.

 

[maxopus]

not to make me your own, and why don't the bevels do them on the components?
I can understand a milling / boring, a hole but I can't guess the usefulness of a bevel on a set.

 

[mandorlim]

I am performing the solid modeling of old paper designs, and I can't change anything. I can't put the bevels and fittings on the part, as the part brings pre-workers to work only when assembled.
part a, has a preforo d.25mm. then the part a is assembled on the part b. on this assembled assembly that we call c, is then made a plating at 26mm widening the foreground, and added several bevels and fittings. there are 3 sets at the table, part a, part b, and part c.
for this I can not do directly the work on part b, as they would reflect on the table, while this has to report only the preforum.

greetings

 

[maxopus]

and a family table in which you suppress the fittings for the table and activate them for the assemblies?

 

[mamobono]

I'm modeling. ...
Preforo.

greetings

Hi.
I will proceed
instead of doing the axieme creates a new part
amounts in it details with the function
insert/shared data/married union,
I recommend you as inheritance so keep the connection and positions as you want
at the end you have a piece composed as your old asm on which you can work as if it was a unique piece

Hi.

 

[mandorlim]

Thanks to everyone, I have already created bevels and fittings with sketch-based revolutions, fortunately it is only one particular "unlucky".
the idea of creating a part derived from the axieme, is good, but I do not know if then in the table it is possible to recall the codes of the components correctly ... in any case now I have done.

 

[RAISUNI]

Congratulations I see you're perceptive you're a junior but you're moving like a senior
I'll give you a hand

 

[Michele Nocerino]

I have the same need. when I join two or more parts to be soldered, then bevels and roundings on the axieme that can not be performed first on the individual components. How do you do that?