bugs with autocad 2009 in 3d

[fpaolelli]

Hello, everyone!
It's been a while since I use autocad 2009 in 2d and nn I've never had problems apart the usual sporadic blocks, now that I'm going to 3d started the problems, when I open the files often there are graphic errors missing parts other parts that I had removed with boolean operations are torrnate, and much more. have any of you found such problems? Can it depend on the poratile that is now 3 years old?
Thank you!

 

[gil]

no, it cannot depend on the computer.
I have not autocad 2009 (unfortunately), but who uses it has never reported such problems. If they really depend on software, problems that are serious, after a year after its publication, a sea of polemics between designers should be created. to me of all this is not raised anything, but I repeat 2009 there is no

 

[warburg]

the program blocks, with autocad, in my experience, are a timeless classic: I've been using 2010 for a couple of weeks and I've already had three, without explanation. precise that I use a precision workstation, board and various bales, so it is not a matter of performance shortcomings, also because I am working on objects of little weight.
historically, the defects that you mention I also knew them, I remember a time when you were "hiding" on a 3d model the display partially showed the hidden lines, and so on, since the solids themselves were corrupted and hiding you couldn't do it anymore.
I admit that, however, many of these problems can be induced by the hardware and software configuration of your pc, I do not deny it; or a faulty license, but the last blocks with 2010 in my case do not have this explanation. . .
Good luck

 

[PlannerRoad]

I recommend, in case you didn't, to install the updates, that for autocad 2009 we are at 3°:
http://www.cad3d.it/forum1/showpost.php?p=104827&postcount=75Moreover, other advice, is to keep updated the xml database of autocad relative to the graphics card:
http://www.cad3d.it/forum1/showthread.php?t=5321that with autocad 2009 update directly from the online program.

 

[fpaolelli]

Okay, thank you, I've found another problem that maybe you can explain to me. I have noticed that the removal command of the materials of the material is not working, the one next to the command assigns material....you understand?