change material properties inv 2013

[dicifa]

Hello, girl.
I have a big problem... .

we passed from 2011 to 2013 and I have some problems...

the first thing is that I used the 2011 template customized by us and gives me a lot of problems with styles and I don't understand why (example: from 2010 to 2011 there was no problem).

practically a problem that I have now is that I can't create new materials with 2013 or to change the properties of the material (eg: by default I have a no-name material that when necessary we go to change the density to have the exact weight)..in 2013 I can't change it... you know how I can do it?

:36_1_4:

 

[dicifa]

I forgot. ...when I enter in management/editor styles does not show me the material. . .

 

[gianlucap]

I forgot. ...when I enter in management/editor styles does not show me the material. . .

to create a new material you have to go on tools, materials.

 

[dicifa]

I managed to change the existing material (density, etc...) and create new ones....is a little different from 2011....

instead the problem of styles I solved it opening a table or part from the template and under management/editor styles there is updated styles and save styles....it was so simple but with f1 I managed it!

 

[Peppe]

I managed to change the existing material (density, etc...) and create new ones....is a little different from 2011....

instead the problem of styles I solved it opening a table or part from the template and under management/editor styles there is updated styles and save styles....it was so simple but with f1 I managed it!

if you take a look at the novelties of the wreck 2013 you notice the differences with the past....

 

[Tarkus]

if you take a look at the novelties of the wreck 2013 you notice the differences with the past....

"She was better when she was worse."

 

[dicifa]

Raga, I'm freaking out!!!!...please give me a hand!! !

I had a 2011 template and when I converted it into 2013 it gives me a lot of mistakes.. .
an example is that I find doubles of styles and materials and I can't eliminate them. . .

In addition I attach a mistake that comes out every time I open a new table.. .


apart from the attached error, did you also happen the same thing?

 

[dicifa]

if you take a look at the novelties of the wreck 2013 you notice the differences with the past....

beppe, but do you use 2013?

 

[Peppe]

beppe, but do you use 2013?

you use 2013 and as I repeat if you look at the novelties of this version you notice the differences of materials management, i.e. they have peeled from the library of styles materials and aspects of materials. you will have 2 separate libraries. always in the help is explained how to perform the conversion between an old wreck and the current.

 

[and]

I managed to change the existing material (density, etc...) and create new ones....is a little different from 2011....

instead the problem of styles I solved it opening a table or part from the template and under management/editor styles there is updated styles and save styles....it was so simple but with f1 I managed it!

How did you change the density of an existing material that I can't?
I still have the 2020 version!!