ciao!

[mimmo75]

Greetings to everyone, I am a mixture of aroma and work in mechanics for 12 years, little time ago I used powershape but my main has replaced power with visi. I tell you the truth, I don't understand anything seems confused and as usual manual in English. I hope to learn the basics of this software to me unknown.

 

[Lucky66]

there should be the cd with help in Italian,otherwise ask the truth.
ps. Have you done at least one basic course??
Hi.

 

[user.cadcam69]

if you have had the opportunity to use the new version 18, you will also have noticed that a new help on the fully renovated and complete cam has finally been inserted. . . only flaw is that for now only the English version exists... even if now English should be within reach of everyone! !

cmq, those of the truth told me that they are working on the translation in Italian.:finger:

 

[massimo gallina]

happy birthdays...... here we have gone from top-of-the-cat-try to faces......... all another world. and the beauty is that there is no time to learn but you must immediately design complex molds.....

 

[Lucky66]

happy birthdays...... here we have gone from top-of-the-cat-try to faces......... all another world. and the beauty is that there is no time to learn but you must immediately design complex molds.....

Why this choice? :biggrin:

 

[innocente]

Hi, Mimmo.
we as firm since he entered as standard cad/cam, our technical office for design became operational in just over a month (with a course of a week in company), same thing for the office molds.
Unlike other cad is very fast to learn, just be "plastics" :biggrin:.
Hi.

 

[Parametric_Ozzy]

Why this choice? :biggrin:

Surely for a matter of costs and secondly because many offices do not adequate training on parametric modelers, or better use the parametric as if they were explicit not exploiting their nature.

 

[Lucky66]

Surely for a matter of costs and secondly because many offices do not adequate training on parametric modelers, or better use the parametric as if they were explicit not exploiting their nature.

This is true I have a couple of clients who used nx to design molds when I went to them to help in design, they were converted to visi.

 

[Parametric_Ozzy]

This is true I have a couple of clients who used nx to design molds when I went to them to help in design, they were converted to visi.

idem vice versa, that is why the handle always counts a little...
if only the sotware were used for how they were conceived and according to their logic, perhaps the learning curve would be less for everyone.

 

[stefanov66]

Hello, everyone. I have lived for about 15 years and while not having experiences with other cad I must say that I am well with this software. usually design presses pulls, even rather complicated. I do not use the application progress, also because I have to be very elastic especially with the mannaia of the possible dowel due to unforeseen breaks, but I confess that I would like to be able to use it, also to evaluate its potential.http://www.cad3d.it/forum1/images/smilies/smile.gif