cocrete direct blocked work window

[Paolo Sala]

Good morning to all,
I ask help to solve a problem quite annoying. during modeling in 3d, following any operation, emphasizes no. 1 operation, the view window freezes. the program works, but both the mouse pointer and 2d lines or construction are not seen. you can save, create a new session and reload the file and restart. but a new command still stops.
the pc has the following features:
intel(r) core(tm) i5-6200u cpu @ 2.30ghz 2.40 gh
16 gb ram
intel hd graphics 520

Can you help me? Thank you.

 

[Kaji]

5 years ago; they told me it was a video card problem but once updated the drivers the pc the situation worse then they changed my post and more had problems.
for almost 4 years, ie with passage to hp z440 (it seems) I also disabled the automatic saves, but to give you an idea on old pc on which however it is used benign modeling also with heavy assemblies:

intel(r) core(tm) i5-4570 cpu @ 3.20ghz
8,00 gb ram
intel(r) hd graphics 4600

If you want to play a little bit with the window view settings you can go to "coarse" values that weigh less the video card, but I think your problem can not be solved by changing only some settings

 

[cacciatorino]

If we talk about a fix, I'd change the video card. on ebay you will find a picture of good performance less than 100 euros. I don't think it's suitable for cad systems.

 

[soypresents]

as an outsider it happened 5 years ago; they told me it was a video card problem but once the pc drivers were updated the situation got worse so they changed my location and i had more problems.
for almost 4 years, i.e. with the transition to hp z440 (i think) i have also disabled automatic saving, but to give you an idea on an old pc on which modeling is still used quite well even with heavy assemblies:

intel(r) core(tm) i5-4570 cpu @ 3.20ghz
8.00 gb of ram
intel(r) hd graphics 4600motorcycle x3m
if you want to play around with the view window settings you can go to "coarser" values which will make the video card less burdensome, but i believe that your problem cannot be solved by changing just a few settings

View attachment 67052

It's work for me. Thank you very much