command convert entities and home command (dome)

[Staedtlerp]

Hi, guys.
I am creating a mechanical piece and in the sketcher environment, after selecting a face, I have to create a new sketch that has the contours of the selected face. in solidworks there is the command converted entities and I wondered if there is a similar command on the catia... Besides, I couldn't even find the dome command (dome), which in sw exists and in catia no. I finally solved the same, and I realized the dome through the dome profile and then the shaft command thanks:finger:

 

[ferrezio]

inside the sketch you find the commands, project edge, 3d intersections and silhouettes, is the equivalent of the command you call converts.

the dome command does not exist in part environment, but exists in generative shape design environment, and corresponds to the "fill surface" function, however the process of a semi section revolution is more than correct.

Hi.

 

[Staedtlerp]

thank you very much ferrezio....:finger:

 

[Staedtlerp]

If you want to get the traces of the circle centers how should I do it? ... let me explain.... let's make the case that I have to create a sketch on a surface of a piece, and the piece is a simple cylinder....on the circular surface I must then draw concentric circles with circular profiles of the surface. How do I have traces of the circle centers of the starting surface? ....and if you want to have traces of other constraints? Is there an appropriate command? ...thank you

 

[ferrezio]

If you have identified the three controls for the capture of external entities, the second "interseca elements3d" allows you to create the intersection between the external geometries to the sketch and the sketch plane, remember that they have to cross the sketch plan.

in the case of the centers, working with the sketch in isometric position, you just select the cylidric part and automatically the central axis is proposed.

Hi.

 

[Staedtlerp]

thanks ferrezio:finger: