enrico1979
Guest
ciao a tutti ragazzi.
avrei una domanda relativa ai contatti in patran.
allora, seguendo un semplicissimo tutorial su youtube ottengo, dopo aver fatto attach master il seguente messaggio di errore:
can not use the database for post-processing: "c:\users\enrico\desktop\cad fem\7-patran\youtube\contact\contact.master". the database does not have the proper data for dadirect access. please make sure that the database files, i.e. "*.master" and "*.dball" both exist and are readable. there may be other reasons the specified database is not acceptable or cannot attach including: (i) system cell(316) was not set to "7" or "19" when the database was created. (ii) nastran job did not complete successfully. (iii)
ora avendo seguito i passaggi scrupolosamente mi chiedo cosa io stia sbagliando ( vi post il link del tutorial, ovverohttp://www.youtube.com/watch?v=0ffjuhmkiau&feature=relmfu).
I ask another question.
I come from ansys and when I imported softwafe assemblies I autoamatically detected the contacts that I, depending on the situation I could leave bonded (i.e. as if considered a single body) or other characters when I had to deal with, for example, with compounds between them bullionates (and I want to add that, even if it might seem gross and little accurate, studying assemblies not very large in this way, as a result of destructive software
in Patran instead I have to rethink the cad model, realizing the together as a part or is there a way to fresco the assemblies in a different way? modeling 20 contacts in fact (that in most cases contacts are not as they are elements between them welded ) would seem to me an abominable thing .
thanks early for the help and good weekend to all
ps. I apologize for any kind of crook
avrei una domanda relativa ai contatti in patran.
allora, seguendo un semplicissimo tutorial su youtube ottengo, dopo aver fatto attach master il seguente messaggio di errore:
can not use the database for post-processing: "c:\users\enrico\desktop\cad fem\7-patran\youtube\contact\contact.master". the database does not have the proper data for dadirect access. please make sure that the database files, i.e. "*.master" and "*.dball" both exist and are readable. there may be other reasons the specified database is not acceptable or cannot attach including: (i) system cell(316) was not set to "7" or "19" when the database was created. (ii) nastran job did not complete successfully. (iii)
ora avendo seguito i passaggi scrupolosamente mi chiedo cosa io stia sbagliando ( vi post il link del tutorial, ovverohttp://www.youtube.com/watch?v=0ffjuhmkiau&feature=relmfu).
I ask another question.
I come from ansys and when I imported softwafe assemblies I autoamatically detected the contacts that I, depending on the situation I could leave bonded (i.e. as if considered a single body) or other characters when I had to deal with, for example, with compounds between them bullionates (and I want to add that, even if it might seem gross and little accurate, studying assemblies not very large in this way, as a result of destructive software
in Patran instead I have to rethink the cad model, realizing the together as a part or is there a way to fresco the assemblies in a different way? modeling 20 contacts in fact (that in most cases contacts are not as they are elements between them welded ) would seem to me an abominable thing .
thanks early for the help and good weekend to all
ps. I apologize for any kind of crook