control for transparency part

[ferro.84]

Good morning to all,
I would like to learn how to write lisp commands, I ask the most experienced
to start I would like to create a command that allows to turn on/off a piece's transparency when I click on the part.

I know that you can change transparency by going on "part ownership", I just want a faster procedure.

Thanks to who will help me.

Have a good day.

 

[reb_bl]

find little, but that little is the base from which to start on the development kit of cocreate.
If you need it here, we'll give it to you.
In this case you must first see that the selected part becomes active and then modify the property by putting everything under "if" in the sense that if transparency is active then make it opaque, otherwise vice versa.

 

[ferro.84]

I'll keep reading the integration kit, then.
I had already begun, with patience I will try to understand.
the idea of using a "if" is right, at the moment I have no idea even how to start writing a new command, unfortunately.
it would take a tutorial besides the unclear integration kit, maybe there is something on youtube, etc.?

I would also like to subscribe to the forum on www.cocreateusers.org, but it is impossible to do it because
to register you must fill out one of those fields "I am not a robot" and, since the site is not updated,
the error "recaptcha v1 is shutdown".
the funny thing is that to contact the site administrators you need to fill out the same field!
Does anyone know how to participate in that forum?

Thank you for your help! :

 

[cacciatorino]

I would also like to subscribe to the forum on www.cocreateusers.org, but it is impossible to do it because
to register you must fill out one of those fields "I am not a robot" and, since the site is not updated,
the error "recaptcha v1 is shutdown".

I think that site is more or less dead. test on cad.de, it's in German, but I wrote in English several times and they answered me without probelmes.
https://ww3.cad.de/cgi-bin/ubb/forumdisplay.cgi?action=topics&number=29

 

[ferro.84]

in reality there are also posts at the end of November 2018. Mah!
I will read with google translator for German on the forum you have indicated to me!
Fortunately, no problem for me either. .

Thanks

 

[andrea1974]

f6 premiums for transparency part