control machines and software which use i look for advice

[jakysmilzo]

Good day to all, if I am in the wrong forum I apologize and hope you can address me in the right one,
I am a wooden modeler, wooden models for foundry moulds, working exclusively with manual wood machinery, I would like to evolve and approach machine tools to improve my services, I did a autocad course in 1992 , in the times I learned from self-taught rhinoceros, and visi 19 , I wanted to understand two things :
1 which machine to buy?
2 what software to buy?

I accept advice
thanks in advance and good work

 

[SHIREN]

Good day to all, if I am in the wrong forum I apologize and hope you can address me in the right one,
I am a wooden modeler, wooden models for foundry moulds, working exclusively with manual wood machinery, I would like to evolve and approach machine tools to improve my services, I did a autocad course in 1992 , in the times I learned from self-taught rhinoceros, and visi 19 , I wanted to understand two things :
1 which machine to buy?
2 what software to buy?

I accept advice
thanks in advance and good work

Hi.
Welcome to the cummunity of Italian designers

the less we are in the same sector
Your question is too generic
depends on the type of your work
large models
average models
small models with tolerance h 3-2-1
Wooden hand desks
or "mechanized" resin wood
model plates with multiple prints etc. etc.
if you also make prototypes "pilot"
or use resin plates in various densities
polystyrene
phenolic plywood
or build models for non-ferrous material foundry
and difficult to recommend to "good"
which cnc buy or which sw use
everything depends on your needs
comunqe big way
light machines with aluminium top or plastics
with vacuum pump for blocking the piece
with running machine in x and y minimum 2000x3000 or 4000x4000 and 800 in h
the sw if you do not use the 5assi
what costs less
if in possible you would be a more precise moment on what you do
Maybe we'd try to help you
Thank you very much

 

[jakysmilzo]

hi shiren, we produce medium-large models for cast iron and steel castings, they are mainly hand-printed on the ground, even if by now most of our customers have training systems and many times the anime cases are reinforced with extractors and filters to be "dipped", we use mostly phenolic plywood designs, of course to start looking for a machine of small size just spending ) I wanted to understand the most indicated and similar in order to insert mathematics into the machine, I do not have very clear ideas on the various stages ..

 

[SHIREN]

hi shiren, we produce medium-large models for cast iron and steel castings, are mainly hand-printed on the ground,
Hi.
♪

I understand the kind of work you do
wood for maximum resins
My experience tells me if you make small models take small car
medium and large models take big machine
It's useless to start with a small car to give you a specific experience
after one or two months you will roast your liver and you will be forced to another investment
take a 3000x3000 or a 2000x 4000 h 500-600-700-800
where you can place with convenience two models means or two half anime chests
with suction plan
It's useless to tell you that both the models and the anime speakers will build them for layers with h max 100 mm
because on the market the specific cutters have a h 150 including the fastening stem to the spindle 100-110 useful part
for a cad you have to take a surface modeler
which also does not give prob in modifying existing maths in the first place to eliminate existing rays
in the sense that the mathematicians must add overmetal and sform angles
more the insertion of doors compartments for removable pieces between souls and courses
also the essential cam must recognize the crude because most of the times 99/100 do not start from full
there is some company that makes cnc specific for modelers x foundry if you intersect I send you a mp
however starts with the quotes
cnc cad
then we discuss
Thank you very much

 

[jakysmilzo]

hi shiren ... I did some research with various vendors of work centers I have the ideas a little clearer, but you want to send me an mp I appreciate it, besides how much I understand that it is solid work, riho, or similar I do not change so much because they are good all wrong?