copy system coordinated by a set

[bruce.mclaren]

Hello everyone, I would need a pro-and wf4, I need to copy a coordinate system from one set to insert it into another set. What procedure should we follow? thanks for the answers

 

[bruce.mclaren]

I better explain, I have to insert the coordinate system car inside the axieme relative to the only steering group as I need to calculate the coordinates of the center of the cs0 car (which however is absent in the axieme of the steering group). I know that there is a possibility to do something like this in pro-e but I do not remember the exact procedure :frown:

 

[dema]

try to see if this video answers to your question, the red axieme is first mounted on that I mounted with constraints that yellow

1. active the axieme in which I want to create coordinates (the yellow one)
2. I create the coordinates referring to that of another together
3. I open the yellow axieme
4. redefine the coordinates by blowing up the external reference
5. select the basic coordinates of the aid
6. to this point we are ready to add the bond

http://www.youtube.com/watch?v=05o_hyh_j9c

 

[bruce.mclaren]

Thank you, the procedure I think is this, although in my case the two axioms are not assembled with each other but remain on two separate files