custom deduction sampling

[reggio]

Hi, I apologize immediately if this topic has already been dealt with (addition I have the feeling I have already asked myself... But I can't find anything... even with the search...) it would be a matter of customizing a sampling or deduction (intensive as filler of the sections) that in this case I would use then to create a "s" continuous without end... I emphasize a "s" and not one and a half or two or three flanked, in short a sinusoid. . .

Can you help me make a sample like that?

 

[Giuseppe Mauro]

Then you don't need a sampling, but a type of line
sampling is a repeated reason. depending on the width you will always have a repeat (1.5 - 2 - 3 modules combined)

I think you need to indicate isolation (the classic synergy of the insulating layer).
Well, in this case, you'll have a lot of trouble.
you can determine for the line type the width of the handle, but it will always remain that, so as to vary the thickness to be filled, it will be poor or cut.
for the retino is worth the same speech, only that you will have extra space between two lines of the same reason. so you may have multiples or cut samples.

The only thing you could try, if it's like I think, is to create a dynamic block that has an array parameter in the sense of length and in the sense of width a stretch parameter, so as to widen or tighten "the package" and replicate it for as long as you want.

 

[reggio]

hello and thank you, "line type" ...that's why maybe I didn't find anything with search... :redface:

I think you need to indicate isolation (the classic synergy of the insulating layer).
you can determine for the line type the width of the handle, but it will always remain that, so as to vary the thickness to be filled. . .

It could be fine, actually it is a profile that really has a very precise height and "frequency", creating 3 or 4 with the exact measurements could also be better than sampling.. .

But now, do you want to explain how to do it? :tongue:

for the retino is worth the same speech, only that you will have extra space between two lines of the same reason.
The only thing you could try is to create a dynamic block that has an array parameter in length, and in the sense of width a stretch parameter, so as to widen or tighten "the package" and replicate it for as long as you want.

maybe the line is really the best in my case: the long tray as I need and it is already finished

Would you help me do it? :tongue:

 

[Tristan]

You should start with creating a form of sinusoid (excuse the word game), so with the syntax explained egregiamente in online help you write the type of line...but if I can suggest, I would use a dynamic block! easier to do and with greater control.

from my blog:
http://ctrl-alt-cad.blogspot.com/2010/11/isolamento-tipo-di-linea-o-blocco.htmlIt's not exactly a sinusoid but you can adapt it to your case.

 

[reggio]

you should start with creating a form of synergy (excuse the word game), so with the syntax egregiamente explained in online help...

...made form, but the egregia explanation do not find it:redface: Would you give me a link or search string?

...but if I can suggest, I would use a dynamic block! easier to do and with greater control.

... it seems interesting, much more than probably to me it will be enough to "serialize" the copy of my symbol for x times along my trajectory, without climbing (I must not fill, but create a sort of track of tire that "follows the road but does not become as wide as the road"...) if not perhaps the measure 48 (when the road is up, and the look in the plant, then it would be convenient to climb...

So I said, I read your blog,
I created my basic figure "s" (normal lines, not polylinee)
crack block
Hearing block newly created
check to the block a distance parameter
. But how do I call him "interasse"?
and how do they subscribe to a serious action?