different di taglio

[FIGOR71]

Mr President, ladies and gentlemen, I should like to congratulate the rapporteur on his report.
I kindly asked for advice on how to obtain information automatically displayed in the structural elements (such as descriptions, dimensions, etc.) also on components such as elbows, sleeves, flanges, etc. (see image ) , to avoid manually compiling the cut list

separate structural element cutting information (automatic)
separate cutting information component (in manual)

I hope I've been clear

Thank you.

 

[MassiVonWeizen]

descriptions of the structural elements not if they are invented at the moment or from the nothing, but are contained in the welding profile.

 

[FIGOR71]

descriptions of the structural elements not if they are invented at the moment or from the nothing, but are contained in the welding profile.

Thank you.
How do I insert the same thing into the component, if it is possible?

 

[sampom]

Mr President, ladies and gentlemen, I should like to congratulate the rapporteur on his report.
I kindly asked for advice on how to obtain information automatically displayed in the structural elements (such as descriptions, dimensions, etc.) also on components such as elbows, sleeves, flanges, etc. (see image ) , to avoid manually compiling the cut list

View attachment 68524 View attachment 68525separate structural element cutting information (automatic)
View attachment 68526separate cutting information component (in manual)

I hope I've been clear

Thank you.

the "cut tip" is used for multibody parts, consisting of "structural members" (which have their properties, added by you the additional ones you need) and sheets. However in tables obtained from side files (.sldprt).
What I see from your image I'd say is a set. or as you should manage it together! if there are commercial components (or your custom database) you need to assemble them in a joint file (.sldasm). also to those components you check the properties (one time for all. then they will always return those in separate). once in the table you will use the "different materials", not the cutting one. They are not profiles of structural members, the cutting edge cannot handle them.

If you're doing everything in a multibody part file, I'll tell you right away that you're wrong approaching and you compose/break your life.

(then you can do everything, eh. just that you will need to fill in the property card each time, for each individual body. and you will get very heavy files that nail your system)