export model advance steel 2012 in dxf

[chessippeo]

I'm trying advance 2012 in standalone version, but I can't figure out how you can export the whole model so that it can be displayed in 3d with a autocad or a dxf viewer. I only managed to export it to dwf by typing the dwfout command on the text line. This way you can see it quietly with design review, but a study that has autocad did not display it.

 

[doking]

I'm also interested!

 

[doking]

Have you tried with _audit?
i.e. panel as instruments, verification, extend in autocad verification the objects of advance steel

 

[>Iceman<]

Have you tried with _audit?
i.e. panel as instruments, verification, extend in autocad verification the objects of advance steel

hello to all, the _audit command (it is an autocad command) serves to verify any errors.
to export the model you must select objects and convert them to acis (autocad management algorithm).
You can do it like this:
1. you make a copy that you will convert
2. select objects using already preset filters in the palettes
3. Right-click and "explodes in acis"
4. save and close
5. from the menu above you have a "barred" beam that corresponds to the command "delete all objects."
6. the model is converted.

Bye.

 

[chessippeo]

thanks for the answers.
iceman, I tried the method you suggested, but I encounter a problem:
I can only export one profile and not the whole model.
i.e. if they select a profile with the left mouse button and then I click the right button, the quick menu appears with the command "explodes in acis". instead if they select the whole model with the left button, or even with the selection tools present in the toolbar (palette) the item "explodes in acis" does not appear to me at the right click. where am I wrong? probably at point 2) you indicated that I did not understand.
I'm sorry for the questions that you're gonna look silly, but I assure you I've lost us so long without getting to anything.

 

[>Iceman<]

thanks for the answers.
iceman, I tried the method you suggested, but I encounter a problem:
I can only export one profile and not the whole model.
i.e. if they select a profile with the left mouse button and then I click the right button, the quick menu appears with the command "explodes in acis". instead if they select the whole model with the left button, or even with the selection tools present in the toolbar (palette) the item "explodes in acis" does not appear to me at the right click. where am I wrong? probably at point 2) you indicated that I did not understand.
I'm sorry for the questions that you're gonna look silly, but I assure you I've lost us so long without getting to anything.

Hi, Chessippeo.
No problem.

you have a tab called search filters.
you will click, in the order,

joint box --> delete = so doing scan the macros
profiles --> button dx --> explosions in acis
plates --> button dx --> explosions in acis
...

as last command, then, from closed file, you have a key called (approximately) "remove all advance objects from a foreign design".
this button works from dead files and eliminates any residue (proxy, etc...).

You can send it.

p.s. there is no possibility of exploding the whole model in a blow.
Hi.

 

[doking]

I for test I have created a step with the steps in grilled, I can convert all the model into acis but not the steps, i.e. the fixing plates of the step are also converted but not the grilled, there is a way to convert also the steps?

 

[>Iceman<]

I for test I have created a step with the steps in grilled, I can convert all the model into acis but not the steps, i.e. the fixing plates of the step are also converted but not the grilled, there is a way to convert also the steps?

the grids explode with the command esplodi Classic.