file parameters print

[gpg]

Good morning
I look for info on how to structure the file for printing, that is how to associate between them color and thickness printed line.
Thank you.

 

[meccanicamg]

with me10 you have to make a new file, press and go into the second tab with the options and open the pen panel. you can assign them thicknesses and colors.
then do a nice print....because if you cancel, you have to do it again for the next press.

 

[gpg]

with me10 you have to make a new file, press and go into the second tab with the options and open the pen panel. you can assign them thicknesses and colors.
then do a nice print....because if you cancel, you have to do it again for the next press.

Can you be a little more explicit?

 

[meccanicamg]

I go to memory because it is done once every 15 years.
with what I told you you should get to the panel set up pens.

 

[gpg]

I go to memory because it is done once every 15 years.
with what I told you you should get to the panel set up pens.

what version of cad you mean?
which menu configuration do you mean?

 

[meccanicamg]

me10 of all versions since 2008 to follow....son all the same