flexibility from problems

[pizzaf40]

Hello, everyone, ask about something I don't understand how to solve.

I have:
- welded together 01 (as01)
- together with hinges (the type hinges of the door) with flexible bond (deg max, deg min), (cer)
- welded together 02 (as02)
- commercial from 100 content (ccxx)
- standard set (a01)

in a01 I have fixed as01, to him is bound cer with active flexibility. the other head of the cer is bound as02. Everything works well!
posiziono a ccx on the as01... everything continues to work well
posiziono un ccx on as02... everything freezes. as02 with its hinges are fixed in the position of min between the extremes I had imposed and no longer moves. He's got the ccxx out of as02 and everything's back to go well.

specific that the constraints of the ccxx to as02 are purely among themselves, not with other pieces or with references of the asseme a01, ne as01.

What can I have done wrong?

 

[Catafratto]

try to bind all the details so that they do not have degrees of freedom (like to make sure that the screws can not turn in the hole), the flexible stuff is "despectful"; limiting the degrees of freedom to calculate sometimes things improve.

 

[pizzaf40]

try to bind all the details so that they do not have degrees of freedom (like to make sure that the screws can not turn in the hole), the flexible stuff is "despectful"; limiting the degrees of freedom to calculate sometimes things improve.

I try to do a quick test on purpose and bring back the result. . .

 

[rf.infissi@libero.it]

I've had the same problem sometimes and I've solved by deactivating flexibility and reactivating it after positioning the component naturally if the assist and small is simple if it's a big set I understand that no is easy.

 

[pizzaf40]

I've had the same problem sometimes and I've solved by deactivating flexibility and reactivating it after positioning the component naturally if the assist and small is simple if it's a big set I understand that no is easy.

Unfortunately it didn't work...or better. ..disabled flexibility, rehabilitated flexibility, works on the first move, no longer works on the second.

try to bind all the details so that they do not have degrees of freedom (like to make sure that the screws can not turn in the hole), the flexible stuff is "despectful"; limiting the degrees of freedom to calculate sometimes things improve.

This attention works instead! I have bound everything that is medially left free (rotation screws and pins) on the pieces belonging to the mobile part, and it has miraculously recovered! So solved, thank you very much!