listastudio
Guest
free video course for graphics inhttp://www.atnet.it/lista/grafpr7.htm21 lessons available online or downloadable as avi movies.
friendliness
study list srlwww.lista.it
friendliness
study list srlwww.lista.it
listastudio
Guest
Graphiclc 2011 is available for download in full trial for 15 days without commitment as in www.lista.it/atnet/grcalc.htmthe demo version does not save but contains in addition to the executable also all documentation as pdf and movies to use the code during the trial period and understand if it meets your needs.
friendliness
study list srlwww.lista.it
friendliness
study list srlwww.lista.it
marcof
Guest
but do you frequent the forum mainly to advertise your products or do you also think, sooner or later, to honor us with your active participation, contributing (as many other retailers do...) to help users who need it?
one by chance and the last in order of appearance: "marcof", that on the alibre forum asked for clarification on various aspects of the program, clarifications never arrived.
in case you intend to continue the "comet" style, with periodic apparitions aimed at the announcement of good commercial news in fact of links to your commercial site as you have been doing for a few years, it will be my concern, albeit with regret, to report how Spammer to administrators.
in the forums whisper also give, not only take. . .
I therefore trust in your answer to this specific question so that it can rule me on what to do.. .
cordially contraccambio
listastudio
Guest
hi marcof, I hope you will acknowledge that the advertising I posted always tries to have some free content that can be spent in terms of pdf documentation, video contests or other downloads.
regarding your reporting of the other discussion, I have tried to point out that the most effective solution to have the best clarifications is to use the latest version of the alibre cad, obtainable free of charge from http://www.lista.it/alibre/tutorials.html, which enjoys thirty days of free technical support even if demo version through the accident report system (login with username and password of the demo version, support and training, new incident).
to the technical support alibre respond to technical well more capable of me and able to indicate the most efficient procedures for modeling.
the only condition is to give up the anonymity, but there is no fee to pay during the evaluation of the demo.
Unfortunately, at least so I understood, if you do not want to use the current version of the cad, if you do not think you can make available the file on which you are working, if you do not want to upload on the site to free the report of the problem to enjoy the free technical support with the incidents, then I just have to respect your opinion without making any controversy.
Bye!
regarding your reporting of the other discussion, I have tried to point out that the most effective solution to have the best clarifications is to use the latest version of the alibre cad, obtainable free of charge from http://www.lista.it/alibre/tutorials.html, which enjoys thirty days of free technical support even if demo version through the accident report system (login with username and password of the demo version, support and training, new incident).
to the technical support alibre respond to technical well more capable of me and able to indicate the most efficient procedures for modeling.
the only condition is to give up the anonymity, but there is no fee to pay during the evaluation of the demo.
Unfortunately, at least so I understood, if you do not want to use the current version of the cad, if you do not think you can make available the file on which you are working, if you do not want to upload on the site to free the report of the problem to enjoy the free technical support with the incidents, then I just have to respect your opinion without making any controversy.
Bye!
marcof
Guest
I have to assume that you probably haven't read what I wrote in those threads. I told you that I was using the latest version:
trial of alibre designTM professional 2012
alibre design version:[ PRODUCTVERSION 14,0,2,14052 ] 64-bit
you understood wrong, it was enough to read the above also
You want me to upload a cube file? Are you kidding me?
aridaje... there is no "incident", simply alibre has a primitive sketcher and for this reason I thought in the first instance to be me not to use it correctly but it was not so. the management of the constraints and modifications of the sketch are a delusion.
Just confirming what I wrote in the first post.
I add that if I write here on cad3d and you intervene then we continue here. the forum serves this. And I must have written it three or four times now. .
in what I wrote there is no controversy. . .
I repeat:
I think you totally escape the content of my various posts, namely: there is no bug, accident or malfunction. I wrote it to you. I had doubts about my procedures and I was wondering if I missed something. I then realized, alone, that the alibre sketcher is extremely limited in terms of the practicality of capture and insertion of constraints. I put a video to show the procedures I used... I had to upload a file with a simple cube so that you can verify what? if the constraints catch them or not? Come on, let's not joke. . .
I feel like you didn't want to confirm what I figured out on my own. go read the two threads and tell me if you couldn't answer me clearly and unequivocally right away.
listastudio
Guest
I don't understand why you want me to recognize as my personal and true those who remain only and only your judgements, although respectable, since you continue to reject the way I wrote you that I can actually help you.
not me, but the technical support of home mother alibre, with technicians much more competent than subscribed, is well available to answer you and to understand if your difficulties arise from a limit of our software or from an incorrect mode of use or from an incorrect copy of the cad that does not enable all the features.
by the way, we have a special site, http://feedback.alibre.com , that monitors in real time the suggestions, complaints and expectations of customers in full transparency.
it seems to me that I only asked you to register for a new official demo from http://www.lista.it/alibre/tutorials.html and to exploit the thirty-day free technical support should not irritate you like this: the "incidents" also serve to help users understand the software and receive suggestions.
In this way, exceeding the anonymity and after making sure that you have a complete and genuine copy of the software in demo, following the proposed flow your disappointment may or be happily resolved (even possibly also through a remote desktop section by the mother's technicians) or switched into a valuable suggestion to improve the product.
if you want to stay in public forums, I will tell you that http://forum.alibre.com you will find many more free users.
Bye!
not me, but the technical support of home mother alibre, with technicians much more competent than subscribed, is well available to answer you and to understand if your difficulties arise from a limit of our software or from an incorrect mode of use or from an incorrect copy of the cad that does not enable all the features.
by the way, we have a special site, http://feedback.alibre.com , that monitors in real time the suggestions, complaints and expectations of customers in full transparency.
it seems to me that I only asked you to register for a new official demo from http://www.lista.it/alibre/tutorials.html and to exploit the thirty-day free technical support should not irritate you like this: the "incidents" also serve to help users understand the software and receive suggestions.
In this way, exceeding the anonymity and after making sure that you have a complete and genuine copy of the software in demo, following the proposed flow your disappointment may or be happily resolved (even possibly also through a remote desktop section by the mother's technicians) or switched into a valuable suggestion to improve the product.
if you want to stay in public forums, I will tell you that http://forum.alibre.com you will find many more free users.
Bye!
marcof
Guest
your is high-class mirror climbing, however look, at this point for me you can wave pretend not to understand what I wrote you here and in the threads of the alibre section.
But then I realized wrong... I thought you were dealers free and so as such you were able to personally provide customer support, at least for earthly issues, how to confirm or not certain ways of catching constraints in sketches.
I tried to alibre on behalf of a friend who wants to pass to a cad3d to use occasionally, without spending what would serve for swx, if, inv, creo etc. maybe I explain to him that if he buys from you the cad then he will have to turn to the assistance of the mother house or write in an American forum.
(cut)
in questo mode, exceeding l'anonymity and after making sure that you have a complete and genuine copy software in demo[/QUOTE]Are you implying that I'm using a regular copy of alibre? Don't even try, don't you dare...
Attached I will put the screen that reports the demo expired, so if you want to do your controls with the license numbers that appear and then, if you have the skills, come in the alibre section to write about his sketcher and explain if I was the one to use it badly or it is he to work so.
Meanwhile, I'll give you the moderator. . .
Attachments
maxopus
Guest
Dear list, this is the harsh web law.
if you use the forum for free to advertise you must be willing to put something on the plate.
and on the plate you can not put 2 pdf on the cross, it would be too easy.
If your potential client asks you information about a certain aspect of the program, it would be appropriate to respond to the tone and not to refer it to assistance or to imply illegal use of the program.
the forum is a powerful comparison tool, if you remove the answers from the impression of not having them and users make a bad opinion.
admitted and not allowed that they were arguments you did not know, you could have informed you since you were not asked to design the eiffel tour in detail.
My conclusion, knowing very well marcof, is that the one you proposed is packaged with 4th order and is so unknown that there is no user over 30,000 able to respond.
to give you an example, such a problem placed in the creo or swx sections would have received many answers and would have been object of comparison.
However, you should at least apologize to marcof for insinuating his illegal behavior.
You don't know him, and you're not allowed to be such insinuations.
if you use the forum for free to advertise you must be willing to put something on the plate.
and on the plate you can not put 2 pdf on the cross, it would be too easy.
If your potential client asks you information about a certain aspect of the program, it would be appropriate to respond to the tone and not to refer it to assistance or to imply illegal use of the program.
the forum is a powerful comparison tool, if you remove the answers from the impression of not having them and users make a bad opinion.
admitted and not allowed that they were arguments you did not know, you could have informed you since you were not asked to design the eiffel tour in detail.
My conclusion, knowing very well marcof, is that the one you proposed is packaged with 4th order and is so unknown that there is no user over 30,000 able to respond.
to give you an example, such a problem placed in the creo or swx sections would have received many answers and would have been object of comparison.
However, you should at least apologize to marcof for insinuating his illegal behavior.
You don't know him, and you're not allowed to be such insinuations.