freeze bar?

[fralory]

Good morning, I'm not very practical about the forum (first time) but I hope someone can help me.
It might seem like a banality but I need to have a freezing function together.
I'm sure there's something that can block subaxes so that some are completely unchangeable while others can stay open and editable. I just found out that the freezing bar only serves for single functions, is there a similar option for subaxis?
thanks to those who can help me

 

[MassiVonWeizen]

the forum is divided into sections including that of solidworks; open a discussion in the correct section expands the possibilities for response.
as it seems sufficient an explanation always better to attach an image

 

[fralory]

the forum is divided into sections including that of solidworks; open a discussion in the correct section expands the possibilities for response.
as it seems sufficient an explanation always better to attach an image

I'm sorry, I thought I created it in the correct one.
I don't know what image to attach, I put the option link that applies to the parts; I need to know if there's something similar to block sub-assistance. Thank you. freezing of a function - 2019 - solidworks guide

 

[MassiVonWeizen]

Good morning, I'm not very practical about the forum (first time) but I hope someone can help me.
It might seem like a banality but I need to have a freezing function together.
I'm sure there's something that can block subaxes so that some are completely unchangeable while others can stay open and editable. I just found out that the freezing bar only serves for single functions, is there a similar option for subaxis?
thanks to those who can help me

Are you sure why you have done this before?
apart from reading files I don't think of anything, I strongly doubt there is a system option, like the freezing bar, otherwise you couldn't even edit files that need to be changed. try to watch the context menu of the right button on the phones or sub-axis.
the request however it seems strange on how much to change a file you have to click on it and press edit or open it, it is not that happen by chance.


inter alia the freezing bar does not serve to prevent the change of functions, me to inhibit the recalculation so as to speed up all subsequent functions

 

[graziano-g]

hi flaroly, a component can be frozen ( improper term ), so it is not allowed to change, only if you use a pdm for the management of the drawings archive. for completeness know that all components or assemblies are also editable an environment pdm, only that with the pdm the modification operation cannot be accidental as it is necessary to carry out a specific procedure in order to proceed.

 

[fralory]

Are you sure why you have done this before?
apart from reading files I don't think of anything, I strongly doubt there is a system option, like the freezing bar, otherwise you couldn't even edit files that need to be changed. try to watch the context menu of the right button on the phones or sub-axis.
the request however it seems strange on how much to change a file you have to click on it and press edit or open it, it is not that happen by chance.


inter alia the freezing bar does not serve to prevent the change of functions, me to inhibit the recalculation so as to speed up all subsequent functions

Good morning, you have expressed my point better than me; inhibiting its recalculation is what I seek. I have a combination with many complicated couplings on which we are working on four hands with google drive and the recalculating at opening often creates inconsistencies, or the superimposed program of alerts that if we suspend couplings and then reactivate everything normal. but it is not correct to happen. So I was looking for a method to block safe subaxes and prevent them from recalculating so as not to create problems in the relationship with other subaxes on which we are still working. I hope I've explained better...thank you!

 

[fralory]

hi flaroly, a component can be frozen ( improper term ), so it is not allowed to change, only if you use a pdm for the management of the drawings archive. for completeness know that all components or assemblies are also editable an environment pdm, only that with the pdm the modification operation cannot be accidental as it is necessary to carry out a specific procedure in order to proceed.

good morning grace and grace of the answer; I vaguely know what you're talking about but it's not our case, we're not a single company but professionals who work on multiple hands files. our need is to avoid reconstruction problems when opening files

 

[graziano-g]

you could use large axiemi or light weight function.

 

[MassiVonWeizen]

matings may be blocked, I don't remember well, but more than anything you need to set system options well to optimize performance.
also light weight modes and large assemblies give help

 

[MassiVonWeizen]

However, it is worth reading the online guide on pages about large axiemes including pages improving the performance of large assemblies

 

[fralory]

Thank you all, I apologize for the delay. we will certainly try to read the guide for the big assemblies, already we use light weight. Obviously there is nothing specific but we have to optimize them. Thank you for your time!