generate numbering

[doriano]

Good morning to all
while going to read messages about this problem I couldn't find the solution.
I would like to number the parts of a product with "genera numeration" but I can't give any number as the window appears to me but I can't put the number, definitely wrong but where?
p.s. work with v5 r19
Thank you.

 

[mcbramby]

you have already done everything .................... .
the program automatically generates the numbers to then ball, you just have to decide whether to "conserve" or "replace" the old numbering in case you are in a file already numbered previously, is not the maximum but is what passes the "convent"
If you go with the right button on one side you will see the number of the ball, which then you will need to make the table in the axieme .

 

[ferrezio]

the numbering is automatic, you cannot enter numbers freely.
If you need to rename the axis, even these are automatic you can only choose whether to keep the previous one or regenerate the new one.
the assigned number is visible in the property panel of the single part.

this numbering is reflected on the ball assigned with the command of "automatic ballpointing" of the table.

If you want to make a custom order numbering, you have to do it only in drawing environment, not in product.

Hi.

 

[doriano]

Thank you
the problem is exactly what going into the property of the part I do not find any number I would not have something turned off in the options. I agree with the rest.
the procedure I have done is this: clicked icon generates numbering, selected part, ok, and so on
Greetings

 

[ferrezio]

you must select the axieme not the single part.

Hi.

 

[bandy]

I have another question. If I have a set with other assemblies inside, why when I give the command to generate the numbering will I also number the children of the assemblies? Who cares if I'm under another set? Isn't that a useless repetition? can you do numbering only at the first level?

 

[gianni55]

If I have a set with other assemblies inside, why when I give the command to generate the numbering will I also number the children of the assemblies? Who cares if I'm under another set? Isn't that a useless repetition? can you do numbering only at the first level?

if you refer to the ball the command generates the numbering of all the details that are present generating only one ball for each of the parts without repetitions. . .

if you just want to avoid the system assigning a number to the parts contained in some subsets, just select the subsets and disable them, by drawing you will have the balls only of the active products (then reactivates them)

if you refer to the numbering of the basic set, and you want to delete some subsets, turn off the option display the distinct base from the property of subsets.

Let me know.

Hi.

years ago