go2cam

[locky_77]

hello to everyone, I wanted to know if someone uses or used: go2cam I have to start using it and I don't know exactly how it is.
I have always used worknc and visicad .

thanks to all.:biggrin:

 

[locky_77]

producer link: http://www.go2cam.net/

 

[marcofor]

I still use the old version was called goelan then as a result of various fusions between misler and cni a part of the programmers separated and continued the development of goelan changing name in go2cam, I use the advanced milling modules not 5 turning axes with motorized and em, the part of drawing of the particular is completely parametric and also manages the tolerances imputed for example if you want to do a straight at 50 h
I suggest you download the demo from the site, there are only the basic modules but you can look at all the features, at least for the first time it lets the online assistant icon active, it explains step by step what to do depending on the module you are using, with even small explanatory videos, if you have some doubts ask as the old version does not differ very much from the new one.

 

[stefano.78]

if you can help, we are direct distributors x go2cam's Italy. visit our website www.systemt.it. before we switch to go2cam we have always sold goelan, so we know it well.

 

[Lucky66]

hello to everyone, I wanted to know if someone uses or used: go2cam I have to start using it and I don't know exactly how it is.
I have always used worknc and visicad .

thanks to all.:biggrin:

Hi.
But the dealer is true (if you took it from them) don't you take the course??

 

[stefano.78]

authorized retailers find them on the go2cam international(fr): www.go2cam.net in the resellers area.