help explosion nx8

[avalon3d]

Bye to all,
I'm starting to experience nx8, but I find some small problem.
I'm having to do a master model set. I create my set, I create the table, in the modeling environment of the table I create a arrangement and an explosion, in a new view.
trying to orient the view (dx key, orient view, custom view, view) does not restore my savory view.
at the time of the table instead the arrangement works, and I insert my view without any problem. to try to recall the view exploded instead nothing: does not feel the presence of the explosion.

Did any of you notice the same problem?
Am I wrong with any procedure?
I am using nx 8.0.0.25.

 

[ceschi1959]

Bye to all,
I'm starting to experience nx8, but I find some small problem.
I'm having to do a master model set. I create my set, I create the table, in the modeling environment of the table I create a arrangement and an explosion, in a new view.
trying to orient the view (dx key, orient view, custom view, view) does not restore my savory view.
at the time of the table instead the arrangement works, and I insert my view without any problem. to try to recall the view exploded instead nothing: does not feel the presence of the explosion.

Did any of you notice the same problem?
Am I wrong with any procedure?
I am using nx 8.0.0.25.

hi andrea 3d:smile:

says the essay (matter): the problem is not in the explosion but in the user....

Have you tried with the replace view?

 

[avalon3d]

how much reason he has the essay: easy for the user to explode, yes.
However the replace view does not solve my problem, it is as if the views saved by the modelling environment were not reported in drafting... .
i.e., I see all standard views, but not those saved, and not even those set on the master model.. .

 

[The_Matrix]

how much reason he has the essay: easy for the user to explode, yes.
However the replace view does not solve my problem, it is as if the views saved by the modelling environment were not reported in drafting... .
i.e., I see all standard views, but not those saved, and not even those set on the master model.. .

if I don't remember the explosion you have to do it in file 2d (or in specification if you're under tc)
Did you do that?

 

[avalon3d]

Yeah, sure.
the problem according to me is linked to the saved views: you can't drive in modelling and don't exist in drafting.
I tried to install the maintenence pack (8.0.0.25), on essay advice, but the result does not vary...

 

[Omen]

hi avalon3d, I don't know if the thing can comfort you but I think I have the same problem too: :frown:
-I'm making the explosion in the table
-Save with name the view (with active explosion)
- I'm in drafting, but by adding a base view I don't see the view saved

I'm pretty convinced that on the 7.5 I was doing this and it worked!

 

[The_Matrix]

hi avalon3d, I don't know if the thing can comfort you but I think I have the same problem too: :frown:
-I'm making the explosion in the table
-Save with name the view (with active explosion)
- I'm in drafting, but by adding a base view I don't see the view saved

I'm pretty convinced that on the 7.5 I was doing this and it worked!

I believe that your problem is in the fact that you go to select as an object to put on board the assembly 3d, while the view explodes is in the table file.
do so:
- add base view
- select the drop down "part"
- verify that the table is selected in the list of parts
- go and choose the view exploded from "model view to use"
... it works to me.. .

 

[avalon3d]

just the passage I missed... default select the model, and then did not see the views.
Now it's perfect, thank you very much!

 

[The_Matrix]

just the passage I missed... default select the model, and then did not see the views.
Now it's perfect, thank you very much!

I can use so little the 2d that every time I care... :tongue: