impossible radius

[TECNOMODEL]

I should insert a radius between a particularly shaped floor and loft.
with the radius command there is no way to succeed, I have already tried all the options but nothing to do.
Any suggestions?

I attach an image to give the idea of what to do.

 

[Tarkus]

already, inventor is good at not wanting to do things a little more complicated.
first thought I would do a sweep:
Scratch on the floor, project the cut edges and use what you need for the connection sketch trajectory

 

[TECNOMODEL]

I was thinking about it too, then I solved by moving a workmanship that created me an interruption of the edge.
made the radius and rework the processing later, problem solved.
Thanks anyway.

 

[Tarkus]

better so

 

[Zac69]

I was thinking about it too, then I solved by moving a workmanship that created me an interruption of the edge.
made the radius and rework the processing later, problem solved.
Thanks anyway.

I love Italians who remake or refine around the problem and solve it. :