link di adams

[fusa]

Hi, I'm a graduate in mechanical engineering.
for the thesis path I need to learn to use adams, I need to optimize the lengths of various links that serve to make a fold.
I start from already given angles, so I can only vary the lengths.
the problem is that once I change the length of the first link the next one does not follow it, that is, the length changes but the starting point of the second link remains unchanged not following the first. I would like to understand how to draw links in such a way that do not remain anchored to points but that vary by varying lengths.
Thank you very much for any answers

 

[Stan9411]

depends on how you shaped the sequence of the various links.
example create first green link and location.
then click on the marker at the end of the green link. the blue link will always stick to the green link even if you change the length.

 

[fusa]

depends on how you shaped the sequence of the various links.
example create first green link and location.
then click on the marker at the end of the green link. the blue link will always stick to the green link even if you change the length.

hello stan9411, first of all thank you very much for the answer.
I think I'm wrong something simple, so I tried to make it on two simple links in another file and I always have the same problem.
I can't upload the video here but I'll link you up so you can see the problem that maybe in words I can't explain.
It lasts 1 minute and 30 seconds, if you have time you would do me a huge favor.
Thank you.

https://we.tl/t-j3wbj237zp