memoria di solidworks esaurita

[lele01]

Hello everyone,
uploading boards or creating tables with sw17 appears to me memoria di solidworks esaurita and closes the program, what can I do to overcome this problem?
thanks to all

 

[MassiVonWeizen]

http://help.solidworks.com/2015/ita...rks/c_hardware_issues_and_recommendations.htm

 

[meccanicamg]

close unnecessary processes and open solidworks. add ram.

 

[lele01]

I have 32 gb of ram is not a problem of ram

 

[lele01]

they sent me an application called gdi.reg has improved but not much

 

[MassiVonWeizen]

netiquette: it is not written in capital.
if you draw a plate with two holes the thing is worrying
if you design an industrial shed with all the machines inside it is more than normal.
if you do not contextualize the situation you cannot help you in any way

 

[lele01]

Sorry if I'm unclear,
design a set where inside I have about 10 parts, size 1,61 mb then I make, new, design, I choose the sheet, I draw the view inside the sheet and drinn "memo of solidworks exhausted" and I can only tell him ok and closes solidworks .
on the parts normally doesn't.
I have another pc workstation notebook same operating system same relese program I do everything without problems.
the pc in question is new of the precision tower 3620 processor intel i7-7700 w10 64 bit 32 gb ram ssd 500gb + hd dedicated for 2 tb solidworks files.
video card nvidia picture m4000

 

[MassiVonWeizen]

on both pcs:
Solid options settings are the same? are imported to optimize the fluidity of work
the drawing templates that are used are the same? If by chance in what crashes you have activated automatic insertion of axles, centering notches, visualization of temporary axes, etc. could be the reason why it crashes
before using solid the memory used is already excessive compared to active processes?
You shut down all the superfluous?
Have you tried to use it off the grid?

 

[lele01]

I made the pack and go on folder in c of both pcs, the settings are the same because saved on file and loaded on both and I closed all applications I'm not working on network,
I have selected the same attributes on the folder.
is a problem that novamacut normally solves with gdi.reg that in my pc did not give many benefits.
practically do 3d on the ws then transfer with hd potatile on pc notebook I make the tables carry them on ws and open and work. seems that when I load the 3d on board loses references.