metal cone trunk development

[cntntn]

Hello.
I have problems building a sheet metal cone trunk, which can then be developed on the floor.
Can someone give me some advice on the function to use? ?

Thank you.

 

[Ivan1990]

Hello.
I have problems building a sheet metal cone trunk, which can then be developed on the floor.
Can someone give me some advice on the function to use? ?

Thank you.

read the regulation and presented, then for this topic I think it has already been treated several times try to do a research.

 

[cntntn]

I read the regulation... I had already sought, and the most similar thing to my problem is this http://www.cad3d.it/forum1/showthread.php?t=4872&highlight=sviluppo+tronco+cono+lamieraI just don't understand what functions they use.... the initial cone trunk from where it comes from? ?

 

[Mike1967]

Hello.
I have problems building a sheet metal cone trunk, which can then be developed on the floor.
Can someone give me some advice on the function to use? ?

Thank you.

loft-lamiera*, sweep, or extrusion to be emptied
in a second time... or thick surface... to be converted.
Now you have food, drink or skip the meal.


*the most suitable!

 

[cntntn]

Ah, here... Now I've succeeded... Thank you very much:finger::finger:

 

[re_solidworks]

loft-lamiera*, sweep, or extrusion to be emptied
in a second time... or thick surface... to be converted.
Now you have food, drink or skip the meal.


*the most suitable!

I usually start from a subtle revolution of 359,9° and then make an insert folds.

Hi.

 

[Mike1967]

I usually start from a subtle revolution of 359,9° and then make an insert folds.

Hi.

...even, but I lose the fold lines... :smile:

 

[COK7SETTE]

Hello, everyone.
I'm a new utonto, just registered.
:

Can someone direct me to a step-by-step tutorial to draw the edible cone trunk?

I have made several attempts, but I can never turn it into sheet metal.. .

Thank you very much.

 

[MassiVonWeizen]

model it directly as sheet with loft-lamiera command

 

[COK7SETTE]

model it directly as sheet with loft-lamiera command

Thank you very much.
study.

 

[MassiVonWeizen]

how to transform a cylindrical body into sheet metal https://www.cad3d.it/forum1/threads/realizzare-tubo-calandrato-in-lamiera-e-poi-distenderlo.46612/

 

[COK7SETTE]

how to transform a cylindrical body into sheet metal https://www.cad3d.it/forum1/threads/realizzare-tubo-calandrato-in-lamiera-e-poi-distenderlo.46612/

Thank you very much, my problem is a little different, but I think I can apply how much read to my design.
If I still can't get the spider out of the hole I'll make me feel by attaching files examples and pictures.
I used spaceclaim where to do so it was enough to stretch the surface (of course it is not accurate, but I did not need a millimeter precision).
I tried with the loft-lamiera command, but I have already wrapped myself trying to make two sketches on different planes (are rather at the first weapons I admit it)....
I'm almost ashamed to say that.

 

[MassiVonWeizen]

Why not attach pictures, files and detailed explanations immediately?
a different t as brino means nothing, for what I can imagine could also not be developed.
if you are at the first weapons do all the internal tutorials of the program so learn the logic of the program and methods of modeling.
the result you get will be as precise as the modeling is

 

[MassiVonWeizen]

to create a new plan:
reference geometry>plan
depending on the type of plan to create select one or more entities

create sketches for a loft-lamiera:
select the first floor and draw a sketch gripselect the second parallel plane and draw a sketch gripBasic rules of sheet metal:
golden rule: if you have to do a particular from which to get development use the sheet commands; this will prevent you from working for a couple of hours with the classic functions and then realize that you cannot get the development and lose 2 more to understand where the problem is.
-the thickness must be constant; it is not possible to develop sheets with not constant thicknesses
-put as bending parameter factor k 0.5 which always allows development; will be corrected later
- if you have to make folds with rays or retreats other than the one chosen as a basis to act on the individual by expanding the affected function
- if you make cuts always set normal cut; in this way the cut will already be modeled on the developability of the sheet.
- if they have doubts about the possibility of achieving the development of a complex part verify its feasibility after each function; this allows you to immediately understand what is the function that creates problems and solve it

 

[MassiVonWeizen]

@cok7settewhen the spider will be out of the hole face to knowstopweat with trepidation your newsstop