micropunte and microfrese for watchmaking/player

[meccanica82]

bye to all,

i wanted to know if someone knows and knows how to judge the sphinx hard metal micro tools (http://www.uvat.it/portfolio/sphinx...-in-metallo-duro-integrale-carburo-tungsteno/). a foreign acquaintance told me well and i wanted to get a match.

thanks and greetings.

 

[marcof]

Bye to all,

I wanted to know if someone knows and I know how to judge the sphinx hard metal microtools (cut). a foreign acquaintance told me well and I wanted to get a match.

thanks and greetings.

Maybe presented first in the appropriate section, otherwise you might think that this is an advertising post. Anyway welcome to the forum and I hope to see you active in making your contribution.

 

[Arturo M.]

raisins is my usual supplier of tools not from goldsmith but from mechanical workshop.
I can assure you that sphinx tools are the tool rolls in general. are simply excellent but you have to be very careful because it has to be up to the user and his equipment, worth a lot of broken cutters and just.

 

[MassiVonWeizen]

not if you noticed, but it's a post almost 4 years ago

 

[Arturo M.]

but it can always serve; Maybe to those who follow and who are looking for the same thing more or less.
If I'm wrong, correct me.

 

[MassiVonWeizen]

your answer will certainly be useful to those who will read the thread in the future and therefore thank you. It seemed to me that I explicitly addressed you to the mechanical user82 that was the typical meteor passing, asking and disappearing (from the counter this was his only post)

 

[Arturo M.]

You're right. I should've checked these things, too. I would've realized it was a commercial request.
sometimes hurry . . . . . . .