mouse verticale fellows

[rinato]

to all,
Does anyone know this article? I have the need to change the classic mouse to the cad and this does not seem to cost too much more than a high range muose

https://www.fellowes.com/it/it/prod...ement&subcat=computer-accessories&tercat=mice

 

[Mario SJPD]

I for problems of tendonitis use vertical mouse "classic" (see image) and I got used to it and above all solved the problem , but this I had never seen it, interesting.
Of course it doesn't seem very cheap I should buy at least 3.

 

[tzadik]

if you have budget take the classic 3d connexion cad mouse.
the economic mouse problem is tracking and weight.

It is not a cost but an investment.

 

[Mario SJPD]

if you have budget take the classic 3d connexion cad mouse.

Are there even vertical?

 

[tzadik]

the original is not vertical, in most cases it can suffice because it is sufficiently "tough" (but not vertical).

having to look for a vertical mouse with a good tracking I would probably go to the logitech.

Google Search

as tracking we are not at the level of 3dconnexion but on a few occasions it becomes a problem.
(personally tracking accuracy I see more on autocad than on 3d modelers).

 

[rinato]

good evening, I recover this discussion only to report that I took and use the mouse I asked for opinions.
I took the "large" model, that is the larger one of the three sizes available, and still a little "small" was.
but the point is another: apart from getting used to the unusual posture, the limit was that it is still "ambidestro" so the hand is never completely comfortable because all the outlet surface is a compromise between the left and right.
considering that it has a rather important base of support can not stand on the mousepad with the rest and you take a good portion of desk.
you can't use it standing up, e.g., to take a flight any info to bring in the workshop, you have to sit down.
and... it lasted a few months* because the scroll wheel has expired (the whole peripheral is, in truth, not very refined/appealing ). considering that I do not do 8-9 hours of continuous cad every day, I would say that, overall, it is not suitable for "we".
Meanwhile I came back on a mouse from a few € and then you will see.

*no, I haven't lost time to asserting the guarantee, so difficult to prove that the use was "correct" rather than improper.