obtain 4 sheets from a solid with "sheet converts": how?

[reggio]

Good morning, everyone! :

use converts sheet sometimes, now I find myself with a dilemma: get 4 sheets from a solid with "sheet converts" how can I do?

i.e., I usually use the command to get 1 single sheet, in this case I would like to get the 4 plates to be soldered...
What should I do? 4 copies of the usual and then convert 4 times?

Isn't there a smarter method? :

 

[reggio]

"hold the body" here is the command you need...

but now I have 4 plates in one part... like the "separ" to give the lamyerist the 4 constructive tables?

mod. (maintaining the bond and parameterity with the original so that you can reuse it? )

 

[MassiVonWeizen]

bhoooo......
and a unique solid?
are 4 walls divided?
have different thicknesses?
Is that an imported file?

 

[MassiVonWeizen]

command dividei

 

[reggio]

bhoooo......
and a unique solid?
are 4 walls divided?
have different thicknesses?
Is that an imported file?

If Mass says "bhooo" are fott@#o;-p
solid unique, built and not imported, same thickness .. what would you think?

divide? never used, it seems to me that it divides a sheet at a time, and that it loses references...

the maximum would be to use the usual base as "assieme" and to extract the 4 plates as parts (legate and parametric) ... already, but how?

 

[MassiVonWeizen]

Mass says bhoooo because with that image you do nothing.
the divid command serves to split a single solid into multiple bodies. You don't want to get four separate sheets?

Are we gonna guess or tie the file?

 

[reggio]

Mass says bhoooo because with that image you do nothing.
the divid command serves to split a single solid into multiple bodies. You don't want to get four separate sheets?

Are we gonna guess or tie the file?

Oh, so I have to do everything here?

et voilà ... but I know that with the part and just can't go ... I could throw it together and then ... the sagomos above or clono 4 separate sheet metal parts? But how...?

master and 4 parts, it would allow me to manage everything very well with the pdm (which is sometimes almost intralcio..) and to reuse and create other hopper would suffice to clo...

 

[MassiVonWeizen]

the file you have attached is already formed by 4 perfectly developed sheets

 

[reggio]

the file you have attached is already formed by 4 perfectly developed sheets

Yes, okay, but how do I step by master to 4 connected parts and related table?
say that it is possible to put on the table directly under the master creating 4 tables relative to the 4 plates obtained?

...but, however, as I'm almost obliged to work, I need 4 separate parts to have 4 separate codes (although wanting to maintain the connection between extracted parts and master...) uhmmm is not like doing. .

... uhmmm I thought ... I threw the solid together, added new part, surface off set=0 and get 4 separate parts with its code, but always connected to the axieme that is led by the master side... ok, but now, how do I echo a sheet from a surface? Is that possible? How?

mod. do I have to do double passage from solid surface and solid to sheet? .. now I try

 

[MassiVonWeizen]

if you want 4 separate files, but connected by the cutting distinct select the sheet and enter the new part.
However, the design of the plates is done quietly on the same side. when you enter the view click on select body, choose the sheet and you will make the table only of that. you can recall in the cartouche properties of the separate cut instead of the properties of the file.

surfaces? What does the surfaces have to do with it?

 

[reggio]

surfaces? What does the surfaces have to do with it?

I have done with the surfaces
so I trained myself;

 

[MassiVonWeizen]

and model it directly in sheet metal?
if 2016 does not manage multibody sheets create 4 configurations, after doing all the model, in which you only maintain one of the bodies using the delete body function.
then in each configuration you will have a different sheet body that you can put on the table without problems

 

[reggio]

and model it directly in sheet metal?
if 2016 does not manage multibody sheets create 4 configurations, after doing all the model, in which you only maintain one of the bodies using the delete body function.
then in each configuration you will have a different sheet body that you can put on the table without problems

I didn't understand how you said you were modeling...
directly sheet would be nice, but what about modeling it? Given the strange shape, with angles not defined 45° 50° ... without a "skeleton" I would not be able to create the 4 basic plates... or do you have a technique that I do not know/understand? :

ps: multibody does not know if it flees on sw16, configurations we try to avoid them because it fà punches with the pdm ..., always the pdm to work well I "obliga" to have 4 different files to which to assign unique code, assign different codes to each configuration I would not be able and the pdm falls ...

 

[MassiVonWeizen]

in post #10 I wrote you how to have four different files starting from the multibody you attached

 

[ghhhhui]

Good morning, everyone! :

use converts sheet sometimes, now I find myself with a dilemma: get 4 sheets from a solid with "sheet converts" how can I do?

i.e., I usually use the command to get 1 single sheet, in this case I would like to get the 4 plates to be soldered...
What should I do? 4 copies of the usual and then convert 4 times?

Isn't there a smarter method? :

Hi, I read your post because I had your same problem.
I propose my solution:

create your hopper (base.sldprt) with normal extrusion and cutting tools and empty the sheet thickness
(This will allow you to choose for example if to make the 4 sheets starting from the inside and filling the welding edges
or to keep 2 “inland” and 2 “external”)

create a set (tramoggia.sldasm) and put in “base.sldprt”
(when you're done, you're gonna make it (a envelope and hide it)

now create a new part (lamiera01.sldprt):
first insert menu at the top —> part and choose base.sldprt setting the parameters as you want (I leave them all checked).
hide plans and sketches that just mess you up and then choose with convert sheet your hopper side.

similarly make sheet 02 03 and 04.sldprt

put the sheets in the axieme and couple them with the base.

if you change the base with the open axieme and the reconstructed command also change the sheets

Tell me if you can

Hi.

guide

 

[MassiVonWeizen]

mha... apart from the answer to a problem of 3 years ago, which however can be useful, I only see a complication not to know how to use or want to use native commands for sheet metal.