on off punzoni tranciatura

[Lucky66]

Good afternoon.
I'm designing a progressive mold, where do I have to put tire movements to include and exclude punches, as well as rack cams, any of you have any different ideas?
unfortunately the spaces between punch and punch is 25 mm max

Hi.
♪

 

[ziotoy]

so without a sketch it is difficult to give you an answer... if you can post something, a section or better still a step maybe I could help you.
Say hi.

 

[Lucky66]

so without a sketch it is difficult to give you an answer... if you can post something, a section or better still a step maybe I could help you.
Say hi.

View attachment 37549Hi.
this I did on other molds, but it is manual push forward or pull the punch you include and exclude.
what I have to do now the cam I have to operate it with a pneumatic cylinder that will be connected to the plc for an on off automatically

Hello!

 

[rinato]

Hi, I get a banal idea, but maybe it's enough for you: can you place the cylinders moving the cams at different heights?
You'd have a normal punch order, the other longer. but you would find the place for several cylinders, if they are larger than 25mm.