Francescosp
Guest
Save to all...I would like to optimize the thickness of a laminate that has a core in nomex and two carbon fiber lamines (a top and a lower). optimization is only of the thickness of carbon foils as the nomex has fixed thickness.
I created the design variable (oftensor), I put as constraint von mises (max and min value) etc...
the f06 file gives me this error that I don't understand:
"user fatal message 5629 (dsad1c)
there are dresp1 entries for response type = stress but there are no corresponding output responses.
user action: check that the element id's listed on dresp1 entries exist"
the id that I inserted is elements that make up the panel.
If anyone can help me, I'd be grateful.
a greeting
I created the design variable (oftensor), I put as constraint von mises (max and min value) etc...
the f06 file gives me this error that I don't understand:
"user fatal message 5629 (dsad1c)
there are dresp1 entries for response type = stress but there are no corresponding output responses.
user action: check that the element id's listed on dresp1 entries exist"
the id that I inserted is elements that make up the panel.
If anyone can help me, I'd be grateful.
a greeting