orientation plans

[danliri]

Good morning.
with sw 2010 it happens to me on some company machines, and strangely on some not.

Therefore: when I make new part or new together, the reference terna has the zeta axis facing down!

In this way, making the first feature on the front floor, this is "soul" and clearly rotates in the opposite direction to that expected.

the same with new together: inserting the first fixed part this sets by default to head down. I must therefore define it mobile, and reconnect it correctly.

sw support continues to tell me that it is a template problem but, I repeat, it only happens to me on some machines.

What particular option do I have to erect in place?
Thank you.

bernard

 

[Mike1967]

that the first part inserted in a set is normal.
about the direction in which a pz is placed, you are sure that all
Are the machines in the same way?
Are the templates identical?
try the option in figure.

 

[danliri]

thanks, the templates are identical, and they are configured on third corner, but the problem persists on some machines.

I ask a question: how can you change the orientation of the reference terna from the default one?

I suspect it's a system option, but I didn't know it was possible.