• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

[ot] opinions sui forum di revit

  • Thread starter Thread starter alpearchitetto
  • Start date Start date
Status
Not open for further replies.

alpearchitetto

Guest
for new forums I can only give you a guarantee: This is the best forum ever! :finger:you receive aid on all requests and doubts (even those ...banal) professors are on other forums, those fly high.
by the way you know that the proximate version of revit 2012 will have a button for the automatic dispensing coffee break, isn't it wonderful? ? :frown:
 
for new forums I can only give you a guarantee: This is the best forum ever! :finger:you receive aid on all requests and doubts (even those ...banali) professors are on other forums, those fly high...
... mmm...
... by chance "know" alma2010 ...:tongue: :biggrin: :finger:
 
:rolleyes: must be my sister...:eek: he has combined some casinos:confused:
I hope not frank :wink:
ke bella all ste faccine ahhh
 
I think you're overreacting, worse than kindergarten children.
I follow many forums and blogs, especially international, and I have never seen such a thing.

It seems to bother you that free professionals, who also work for self-desk, who do courses, that we see at fairs or various official events, which have contributed greatly to the spread of revit, who also write books, provide their knowledge for free.
more than bothering this at my house is called envy.

moderators of this forum, gfrank first, and several of the users who respond daily, are very prepared and very helpful. It is not so difficult to understand what are then the characters who dispense equitable advice on one and the other forum. I must thank you all because without you I would definitely have quit.
but with all good will there is no comparison with what the "professors" know, as defined them in a derogatory way, on the other hand.

the intolerance of some, few and always the same, makes it seem that there is a war between forums and therefore between relative members: But I'm not against anyone.
alma certainly did not make a good figure, but the worst is that she made it do also to this forum and there is nothing to brag about or smile about.
alpe that criticizes so much, goes regularly to find information and also says it defining it "the other forum". What a sadness.

I was fortunate to know many of the evangelists "of the other forum", as they define themselves a little boriosously, that I found instead very kind and helpful, far too. one even paid me coffee at the last saie after having made him talk half an hour of my trouble.

Ultimately: I am a cad3d writing that dissociates from the delusional statements of certain characters who should be kicked out or sat down.
We don't lose anything, they've always asked and never given anything except contempt for those who help them.

rm
 
Probably someone exchanges puppies for lanterns. I'm just thinking frank a serious person! I repeat and close.
 
the serious reputation of gfrank is not questioned and will never be.
as an intuitive you have no other way to fight if not using phrases made like "leaf for lanterns". I'll give you a hand and I suggest "there are no longer half seasons", "abaster the moon", "cascare dal peo", "menare il can per l'aia", "put the wagon in front of the oxen" and we could continue infinity but does not change the substance: attack someone for personal reasons with the excuse to defend or win a forum that has no reason to defend itself and is not in competition with anyone.
think about learning revit and don't always dirty this beautiful forum with nonsense.
 
...it seems to bother you the fact that free professionals, who also work for self-desk, who do courses, that we see at fairs or various official events, which have contributed greatly to the spread of revit, who also write books, put their knowledge at their disposal for free.
more than bothering this at my house is called envy.
...
I do not know where you have read in this forum, statements in which you have been expressed envy towards "the other forum" and will never be expressed, because this forum is not envious at all.
If anything, for your information, look at the rankings of our site: they speak for themselves. Why should we have envy?
I remember that often in the face of users' requests, there are discussions in which they were clearly mentioned, even with direct references to links, publications (or other blogs) that lead to the professionals mentioned above.
the envy of which you accuse us is only your (never) thought! :wink:
... the moderators of this forum, gfrank first, and several of the users who respond daily, are very prepared and very helpful. It is not so difficult to understand what are then the characters who dispense equitable advice on one and the other forum. I must thank you all because without you I would definitely have quit.
but with all good will there is no comparison with what the "professors" know, as defined them in a derogatory way, on the other hand.
...
where do you read the "disdain" of other people?
I in the first place, I absolutely do not want to compare with who is definitely more prepared than me (considered that some of the people you refer to collaborate with autodesk also by profession).
definitely also in cad3d there are professionals who know much more than me (I don't mention names because I don't want to do wrong to someone), as well as in our forum, there are people who have made available to cad3d users an indefinite amount of resources (I quote one for all nirvana) for free, or others (I quote always one for all roberto - frc projects) that always put at your disposal a lot of manuals.
had, these people if they wanted to transpose their work in publications, they could probably write 10 of books, and believe me (doing this really means sharing resources with other users of the forum) surely these are at the same level, if not "a span above" to some moderators of the other forum.
and I say it proudly also because they have never flaunted, against anyone their preparation. On the contrary, they have "lowened" to indicate to new users (principles) "pass through" the list of commands, it oppresses to indicate a solution, in the first line, even if not perfectly bim, in reference to the knowledge of the sw by those who ask "consigio/help". This does not mean that they are not at the same level as others.
... the intolerance of some, few and always the same, makes it seem that there is a war between forums and therefore between related members: But I'm not against anyone.
...
also cad3d is not against anyone, and even users of this forum.. .
at least cad3d does not "war" to any other forum.
... alma certainly did not make a good figure, but the worst is that she made it do also to this forum and there is nothing to brag about or smile about.
...
I read the discussion you're referring to, and it seems to me that he clearly and peacefully expressed his thought, as well as the moderators of the other forum have clarified their comments.
this forum has nothing to be ashamed of: Surely it is you who did not understand the exchange of jokes (and related icons) between me and alpe.
Come on, a little modesty for you, don't spoil. you participated in the forum with only two messages:eek:
I think you're overreacting, worse than kindergarten children.
I follow many forums and blogs, especially international, and I have never seen such a thing.
...
.... who criticizes so much, goes regularly to find information and also says it defining it "the other forum". What a sadness... .
Sorry, but this statement seems like a little "strong" if you consider that you at the first message in this forum, write:
... but with all good will there is no comparison with what the "professors" know, on the other hand....
as you see: preach well but you razzoli badly. :eek:
this is your opinion, which express freely: shared? not shared? but... certainly equally legitimate as the one expressed by alpe.:finger:
... I was fortunate to know many of the evangelists "of the other forum", as they call themselves a little boriosously, that I found instead very kind and helpful, far too. one even paid me coffee at the last saie after having made him talk half an hour of my trouble.
....
you mean that the moderators and advanced users of this forum cannot call themselves "evangelists" because they do not pay coffee, since "half hours" to "talk" of users' problems spend several ...

... ultimately: are a cad3d writing that dissociates from the delusional statements of certain characters who should be kicked out or sat down.
We don't lose anything, they've always asked and never given anything except contempt for those who help them. rm
what your contribution is. trigger this flame?
I hope you are a subscriber to cad3d and have actively participated in the forum: I say this because if I decide to follow your advice, and the two of your only messages are those written above, I should add you to the list....

p.s.
I have taken this discussion from the presentation of users, as it is ot.

p.p.s. I close the discussion, with a little "prepotence" because all those called into question (users of cad 3d) expressed their thought.
being an ot discussion for the revit forum, I do not accept further new messages to call this.

I repeat that:
- you did not understand the "baptize" between me and the Alps, which I repeat did not denounce anyone, especially other forums and/or its moderators. Your illations are free and your response is "a little" above the lines. take it for a "passional" vent.
- cad3d has nothing against other forums, nor against moderators or users of other forums.
 
Last edited:
Status
Not open for further replies.

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Back
Top