partial assembly sections

[marce80]

Hello.
I tried to use the search but I couldn't find anything..:frown:
is it possible, in combination mode to dissect only some components?
Thank you:

 

[marce80]

you can't do it is:frown:

 

[zimmy]

is possible:
- exclude joint components from sampling
- display not dissected components in drawing!

So you can!

 

[marce80]

is possible:
- exclude joint components from sampling
- display not dissected components in drawing !So you can!

here ... in drowing..ma in assembly 3d is not possible to show some integral components and some sectioned?

 

[zimmy]

in principle when you make a section in 3d proe "cut" all the components, so you can only eliminate the sampling ( already in 3d without waiting to go to the drawing board) but the component remains "cut".

If necessary, you could work in two ways together.

- make a cutting extrusion by selectively choosing which components to cut and which not. it is not an elegant solution, it is a feature of together, it is a real cut, you do not have the right weight of the axieme, etc... so I can only recommend it for an image for a manual or something like that. feature then to be eliminated.

- make simple representations of part "setting" the individual parts. then make a simplified representation of together replacing the parts with their separate rappres. this is a brighter solution even if not simple and fast . but you can do it. These are graphic representations therefore do not affect the tables of the executive drawing, but can be recalled in the views of the drawing and can therefore be preserved.

I hope it was clear

 

[marce80]

first of all thanks to the rests and for the availability

Since I would only need to make pictures it would go well the cutting solution in the axieme, but I tried and made me make solid but not cut extrusions... how can it be?

 

[3dxx]

you have to check the option "short material", and after within the intersections box select the components that need to be cut, otherwise it cuts you all the assembling.

 

[marce80]

Yes, the problem is ke nn gives me to remove material as a clikkable option,
...cmq I solved with a cutting blend:finger:

 

[zimmy]

if you are in assembly and activate extrusion, this is only cutting. There are no alternatives.

 

[marce80]

aaaaaa...that's why the icon was active,
nn I could clikkare on the nn icon I completed the command and I didn't realize it was just cutting extrusion.
Thank you.
You are always precious.
:finger: