• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

piston measures

  • Thread starter Thread starter Ingegneremeccanico
  • Start date Start date

Ingegneremeccanico

Guest
Are these measures correct for a diesel piston? :

height: 53,25 mm - total 70,25 mm, 30 x 67 plug, 2.5 x 2 mm x 4 segments.
 
I refuse to answer you seriously. . .
first post
not even a good morning or a word of presentation
a request in the air
there is no drawing on which to explain to what measures you refer
You don't know what disel you're referring to

How do you expect an answer?
 
Ingegneremeccanico said:
Are these measures correct for a diesel piston? :

height: 53,25 mm - total 70,25 mm, 30 x 67 plug, 2.5 x 2 mm x 4 segments.
Click to expand...
To me total 70.25 puts me in trouble, I would like to think about it well before answering.

p.s.: sorry the frankness, but I'm curious to understand the sense of the question, the piston if it exists and has those measures I don't see the problem, if you are calculating it or dimensionaling I remain perplexed, as everyone.
:smile:
 
Ingegneremeccanico said:
Are these measures correct for a diesel piston? :

height: 53,25 mm - total 70,25 mm, 30 x 67 plug, 2.5 x 2 mm x 4 segments.
Click to expand...
..a mechanical engineering. that you designs diesel engines..eek:
..and then living in that amena place known as mechanical engineering. .

Congratulations! great question..:confused:

greetings
Mar
 
sampom said:
..a mechanical engineering. that you designs diesel engines..eek:
..and then living in that amena place known as mechanical engineering..
Click to expand...
but above all design engines with 3dstustomax Rotafl double carpiato with triple screwing
 
excuse ignorance...... but this blessed piston has a diameter or endless curtains...:biggrin:
 
is parasdrubolized to fit every motor for cars bike submersible bike and time machine!:finger:
 
Dirotec said:
excuse ignorance...... but this blessed piston has a diameter or endless curtains...:biggrin:
Click to expand...
diameter?
Mannage the puppet!
That's what I missed, the diameter!
I was calculating the entropy of the engine and at some point it entered the formula the displaced, gugghelando I found that the "cilindrate" comes from "cylinder" and that a cylinder should have a diameter, but sincerely I was puzzled, I thought that the dia meter was a measuring instrument, now it's all clear to me.
Thank you for your help.

p.s.: Do I have a small problem, the "gomites", which have to do with racing?? ! !
 
I know. .
Of course they are right to say that graduates do not know how to write! ! !
If one of my parents wrote me such a report, I'd fire him right away.
to the face, he also did the prof. and he also informed about new technologies.
I don't understand people.
What happened to the author of the discussion?
 
cacciatorino said:
I think the person quoted in that discussion is foreign. We do not forget that the country is populated with people coming from abroad and do not speak Italian very well.
Click to expand...
...but I'm not sure that he's foreign, I have my idea anyway. . .
as to the question of topic...:eek:
 
Alberto.E said:
to make you two laughs... I invite you to read this discussion. I think he's the same person.http://www.treddi.com/forum/index.php?showtopic=73368
Click to expand...
ok involuntaryness, but be careful that it is not correct to link to "competitive" sites
gerod said:
to the face, he did the prof.
Click to expand...
but math.:rolleyes:
cacciatorino said:
I think the person quoted in that discussion is foreign.
Click to expand...
It could be.. and then it's not nice to laugh at people who don't know stories about.

greetings
Marco:smile:
 
sampom said:
It could be.. and then it's not nice to laugh at people who don't know stories about.
greetings
Marco:smile:
Click to expand...
Hey, sam, this mark because this time I disagree with you.
But did you read the first post?
by and I say:
"Is a propeller of this diameter good with this step? "

Okay for what? What's the question?
Italian or foreign, I don't think it's the way to ask a question.
Well, I think someone's looking for it. Or not? Anyway, imho.
 
moralists are always there!!...
- I would not define "competition" the treddi site because it does not deal with design topics but only computer graphics.
- it is not my habit to laugh at people in difficulty, but if I have linked to that discussion I have my good reasons (I have contacted for curiosity the person concerned days ago and I can assure you that it is Italian). Besides, he says he's a math teacher.
It made me smile that this pseudo-engineer says he has very high knowledge of mechanics and then he gets lost on the size of a piston.
However, I think we can close this discussion....the author will now have escaped! :-)
 
Good morning to all,
I would just open a drawing or go to the department
assembly and I have the pistons that "I want"
What's the matter? How many? we can a 4 cylinders from 7000cc
Enough? obvious diesel
What questions? ? ?
I'm sorry I don't want to infieri
but less bad I am a mechanical peritttto :)))
of course.
Peace and peace
normally step above certain "things"
but not
and I apologize
the forum is great!!!
thanks for the attention
_
 
exatem said:
Hey, sam, this mark because this time I disagree with you.
But did you read the first post?
.
Click to expand...
Hello, exa.
No problem, no problem.
Of course I read the first and in fact if you see I have responded also from the beginning by detecting the ineptitude of the question (go back to the first post).
here I was referring to that announcement reported in the link (which we are not sure are the same person, even if it seems); Of course, it makes me laugh, but not knowing who I'm facing, I prefer to go there. do not believe that the jokes "grossolane" do not come to me, but offending I do not like and prefer to silence, wait and know.. then you know well that in the "our" position you need to deal with all the topics with the same detachment.
:smile:
Alberto.E said:
moralists are always there!!...
- I would not define "competition" the treddi site because it does not deal with design topics but only computer graphics.
- it is not my habit to laugh at people in difficulty, but if I have linked to that discussion I have my good reasons (I have contacted for curiosity the person concerned days ago and I can assure you that it is Italian). Besides, he says he's a math teacher.
It made me smile that this pseudo-engineer says he has very high knowledge of mechanics and then he gets lost on the size of a piston.
However, I think we can close this discussion....the author will now have escaped! :-)
Click to expand...
Please, don't just shut anyone up like this. bonism e morismoIn my case, you'd be wrong. I'm the last one.
I repeat, when I don't know, I prefer to wait before I lime the hand.
In this case, I also responded dryly (even you go to see the beginning of posts) because I find it difficult to accept such corbelleries from a 16-year-old mechanical engineer diesel engine designer.
Unfortunately knowledge of the language is not gift of all, graduates or not.

regarding the "competition between sites" mine was only a warning in relation to our regulation, which I must interpret and apply. I just reported it, didn't want to be a "reprove" directed to you. However, here we are also careful, we are already on the edge of the razor.

really without anger

greetings
Marco:smile:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top