pro engineer wf5.0 and/or creo and double monitor

[Daniele-san]

Good morning to all,
we are evaluating the change of our pc (we will certainly pass from a laptop to a 64bit workstation and use the laptop as a bedbed). .
I wanted to know if creowf.50 and I create 1.0 and later support the double monitor.
logically first of all the graphics card must support the two monitors,
do you have any advice on graphics cards even not certified ptc but equally performing? (time ago there were discussions and an exel file where these data were inserted but I can't find it anymore),
but what I would like to know is if you can work with double monitor having for example:
monitor to: together
monitor b: part
or
monitor to: part
monitor b: table setting
etc.
Hi.

 

[Joensow]

Hi.
I'd like to know if there's such a way....
that I know you should open two pro-e.... .
as graphic cards consider that if you work with big assemblies I recommend a nvidia picture....
I don't know anything else.... .

Have a good day.

 

[gianluigi]

I wanted to know if creowf.50 and I create 1.0 and later support the double monitor.Hello, many hannis made the top, were the Canadian tabs of the matrox.
they allowed this and other, assuming that softwear allowed it.
We were the first of the cad.
Hello gianluigi

 

[Daniele-san]

I wanted to know if creowf.50 and I create 1.0 and later support the double monitor.Hello, many hannis made the top, were the Canadian tabs of the matrox.
they allowed this and other, assuming that softwear allowed it.
We were the first of the cad.
Hello gianluigi

Thank you.
but compatibility with ptc wf5.0 ,creo 1.0 and later?

 

[dema]

with a nvidia card that has two outputs, even different, with the wf4 I never had trouble putting for example the model on one screen and drawing on the other; or of the same model a page of drawing on a monitor and another of the second screen

 

[Daniele-san]

with a nvidia card that has two outputs, even different, with the wf4 I never had trouble putting for example the model on one screen and drawing on the other; or of the same model a page of drawing on a monitor and another of the second screen

Hi.
thanks to your suggestion!
a clarification: having two different screens es pattern and drawing or drawing 1/2 and drawing 2/2 etc etc etc. the two screens are always active or you have to activate every time you have to work on one of the two screens?
Hi.

 

[Daniele-san]

I wanted to know if creowf.50 and I create 1.0 and later support the double monitor.Hello, many hannis made the top, were the Canadian tabs of the matrox.
they allowed this and other, assuming that softwear allowed it.
We were the first of the cad.
Hello gianluigi

also from internal experiences I know that they are not very reliable

 

[dema]

Hi.
... two screens are always active or do you have to activate every time you have to work on one of the two screens?
Hi.

It's kind of like I don't have the opportunity to use 2 monitors (I screwed a colleague of mine who's been for a piece by a client) but I think every time you move from one monitor to another you have to activate it through the green point... If you're not in a hurry as soon as I can try...

 

[Daniele-san]

It's kind of like I don't have the opportunity to use 2 monitors (I screwed a colleague of mine who's been for a piece by a client) but I think every time you move from one monitor to another you have to activate it through the green point... If you're not in a hurry as soon as I can try...

Thank you. look your news
Hi.

 

[dema]

I tried just now with a laptop and wf4, putting the model on one monitor and putting it on the other:

when switching from one monitor to another you have to activate the new​

 

[Daniele-san]

I tried just now with a laptop and wf4, putting the model on one monitor and putting it on the other:

when switching from one monitor to another you have to activate the new​

Thank you dema,
just for clarification... what do you mean to activate? the classic operation that you do on pro and to activate the screen you see working on? or anything?
Hi.

 

[dema]

yes the green icon in the shape of the point.

 

[maxopus]

ctrl+a... right?

 

[dema]

just... as always