problem eps with photoshop

[amira82]

Hello.
new community.
my problem concerns the eps files that mold with autocad having set the page format. However when I open them with photoshop are only 1/3 of the original design in cad.
How is it possible?! What to change???
Please help me
I have to set thesis!!!

 

[asalalp]

in autocad imposed the print scale?

 

[amira82]

You, tax.

 

[asalalp]

probably depends on the resolution inside photoshop. check the same as eps and work document

 

[amira82]

nothing to do, the problem persists
but maybe there is a method to set the epis in photoshop?

 

[asalalp]

Do this test. autocad molds on an a1.
in photoshop open a blank document (e.g. a1 to 200 pixel/inch), open the epis separately (impounds 200 pixel/inch) and the size of an a1.
translate the epis into the new document

on a competing forum if you talk about it but I cannot link it because it is against the regulation

 

[amira82]

: Not right!

the eps file is always halfway!

 

[asalalp]

try printing in pdf (pdf creator) and see if the problem remains.
otherwise attach the eps here

 

[amira82]

pdfs are printed normally, only I would like to maintain the thickness of the pennines.
cmq attach here the file:

 

[amira82]

pdfs are printed normally, only I would like to maintain the thickness of the pennines.
cmq attach here the file:

the file didn't appear... I zipped it.

 

[amira82]

asalal
I think it's a carcad problem.
I did the same using another pc with autocad 2007 and photoshop cs3, also there is the same problem

 

[asalalp]

the epis is 17 x 20 cm. Have you set a custom sheet?
imported in photoshop always occupies 17 x 20 cm

 

[amira82]

Thank you!!!! I solved! ! !
I wanted to ask you one last thing, but a resolution of 300 pix/inch a plant with 0.05 nibs in scale 1:20000 read well?

 

[asalalp]

the best thing is to make a print test, even a piece on an a4 in the house.

normally 200 pixels/pollica is fine.

 

[amira82]

A thousand grazies!