problem shell function

[giulio1993]

good evening to all, I have a problem with using this command. I find myself having to work with a full motorcycle wheel frame. the file on which work was obtained by converting a stp into prt. Now I would like to make the frame more truthful by forcing the tubes but the program does not recognize the faces of the same and therefore I can not move on.
Does anyone know how to overcome the problem?
thanks for the help

 

[giulio1993]

Perhaps I have wrong forum section, I apologize

 

[AndreaTerzi]

hello, but in the conversion you then solidified the whole or your prt remained only of surfaces? However the shell command serves to empty a solid not to make holes.

 

[giulio1993]

hello, but in the conversion you then solidified the whole or your prt remained only of surfaces? However the shell command serves to empty a solid not to make holes.

Forgive me, I expressed myself badly, to pierce I meant to empty, there is a pipe full to a vacuum. in conversion has become full

 

[AndreaTerzi]

You should see the model and make tests .. can be that the surfaces that come from the stp go to choke with the feature.

 

[giulio1993]

You should see the model and make tests .. can be that the surfaces that come from the stp go to choke with the feature.

the feature asks me to start from the faces of the cylinder to be emptied, I do not have the faces but I have the external surfaces

 

[AndreaTerzi]

Excuse me, but if it's a pipe, you'll have two flat surfaces at the ends or not?

 

[giulio1993]

Excuse me, but if it's a pipe, you'll have two flat surfaces at the ends or not?

no because being a frame of traliccio are all

 

[AndreaTerzi]

I understand .. complexity plays bad jokes .. the only one is to analyze the model to understand what it is possible to do ..

 

[giulio1993]

I understand .. complexity plays bad jokes .. the only one is to analyze the model to understand what it is possible to do ..

If you want, I can send you the file. I don't know what to do

 

[320i S]

complex objects of these imported types, in my opinion they must be handled with the surface controls, even because a tubular frame, is not said to be emptied in a regular way, on the t joints in particular and suspect also that certain tubular ones, have different thickness and managing with the surfaces, you can get a result identical to reality.

 

[giulio1993]

complex objects of these imported types, in my opinion they must be handled with the surface controls, even because a tubular frame, is not said to be emptied in a regular way, on the t joints in particular and suspect also that certain tubular ones, have different thickness and managing with the surfaces, you can get a result identical to reality.

Thank you for the answer. Do you have any tutuorial videos to show me? Unfortunately I have never molded surfaces yet. I was thinking about working with under the frame I have (with below I mean in my session I create) and then drawing on it using it as a reference, but I have no idea how to do it.. In addition I would need to change even the sections

 

[320i S]

Sorry, I don't have any.
If you also need to change sections, the question becomes even more mandatory to manage with the surfaces, and on the contrary, if you also need to make a frame bom, it is also to get the single pieces, such works require the advanced assembly

 

[giulio1993]

Sorry, I don't have any.
If you also need to change sections, the question becomes even more mandatory to manage with the surfaces, and on the contrary, if you also need to make a frame bom, it is also to get the single pieces, such works require the advanced assembly

in the good nessuna