problem solutore code aster

[andreaschiev]

Good morning.

I am practicing with caelinux 2008 with livedvd:
- step or iges amount made with solidworks
- with mesh everything ok (I think) - the only unknown is: it is normal that the writing remains red and with the asterisk in the tree?
- imposto code aster with wizard --- Solutor but he comes out saying that he can't lodge memory. does not create any message (.mess)
- consequently the post proc does not display anything

the set memory is 1024 and 200 sec

What can I change?

 

[cacciatorino]

the set memory is 1024 and 200 sec

What can I change?

aster consumes a lot of ram, if you are using the 32bit version try to increase the ram to 1500 mb and the time to 10,000 seconds, and to reduce the finesse of the mesh, possibly making submesh in the most critical areas. in the past I had some similar issues that I could solve using a rougher mesh initially, and then going to 64-bit code-aster compiled.

if you know English you should ask anyway www.caelinux.com or on www.code-aster.orgIt's easier than finding someone more competent.

 

[andreaschiev]

in fact I use the 32 bit.

Now I try. Thank you

 

[andreaschiev]

other question. .
is it normal that in the object tree the name of the iges or step stays red with the asterisk?

 

[cacciatorino]

other question. .
is it normal that in the object tree the name of the iges or step stays red with the asterisk?

Now I'm on windows and I can't check, I feel like I do.
If you have a 64-bit hardware download caelinux 2009, it's 64-bit.

 

[andreaschiev]

Thank you!

 

[andreaschiev]

Everything went well.

thanks to hunter for information.

good weekend to all!

 

[funambolica]

is it normal that in the object tree the name of the iges or step stays red with the asterisk?

Yes it is absolutely normal.
when there are slight problems (type errors in the meshatura or meshatura not carried out/incomplete) appears a yellow exclamation point:wink:
or, if they are serious problems after the solution, the written error:wink appears:

 

[funambolica]

Let's get a hardware of 64 bit scarica caelinux 2009, e'a 64 bit.

Actually, the 32-bit version can also work on a 64-bit hardware, just change the salome configuration file, introducing the string at the beginning of the file indicating the location of the appropriate library, which is called libg2c.so.0
to find the complete route simply launch the command

locate libg2c.so.0

in una shell.