problem with nvidia frame fx1800 768mb

[Davari B.]

Good morning, everyone.

Help! !

I’ve gotten new ws hp z400 and installed graphics card nvidia picture fx1800 768mb.
for now use inventor 11 sp4,
Unfortunately things are not good with the graphics card.
when rough axemi, there are polygons that do not center anything with my design file, it seems that the driver is not properly handled!!

Can anyone help me?

what I have to do to eliminate the problem and use the max. performance of the card.

Thank you very much.

 

[Ezio Olivato]

update the video card drivers directly from the manufacturer's website. and do the wrongs of an egg in the while!

 

[Peppe]

try changing opengl/direct3d setting

 

[vemi]

.... same problem thanks to a 4 December view update, I solved by carrying out the restoration of the previous driver

 

[ReFazzi]

same different problem card:
64 bit, windows 7 ultimate, picture fx 1800, inventor 2010, sp updated
in the table if I am slow in placing a view or putting odds I graphically get the screen as from attached image. when I confirm the position disappears the "sporty" and fixes the quota correctly. I updated the driver from the nvidia but the problem remained.
I also tried to set direct3d and direct3d 10 does not change anything.
greetings

 

[Ezio Olivato]

c.v.d.
The bewilderment is rite, as I see!

 

[ReFazzi]

ops I didn't attach the image. . .
... if there were any unfair software that solve these problems I would acquire a basket
Hi.

 

[radio]

ops I didn't attach the image. . .
... if there were any unfair software that solve these problems I would acquire a basket
Hi.

Just for information, sometimes it happens to me the same thing (with solid edge 18), both on a ws with the picture 1800 and on that with the 3800.
as I said the phenomenon is sporadically and does not seem related to a model and/or together in particular, and I have not noticed differences after the various times I have updated the drivers.

Bye.

 

[ReFazzi]

In fact yesterday I had this problem, but today it seems fine... It could be a sw and I know
Hi.