reading errors g02 and g03 with selca cnc s3000

[david_67]

good afternoon, I ask a little help to solve a problem unknown to me, I press that I do not develop paths cams daily but often some customers ask us to realize the paths cam after the development design of a particular.
use toptron e10 and genero a iso std program (post demo) which is then customized and interwoven by the miller. normally it's okay but today a miller that uses selca cnc 3000 tells me not to be able to correctly read the g02 and g03 that are common interpolations on single blocks and that normally do not trouble. .

Can you give me some kind camouflage?

thanks dawdo

 

[cimaguy]

good afternoon, I ask a little help to solve a problem unknown to me, I press that I do not develop paths cams daily but often some customers ask us to realize the paths cam after the development design of a particular.
use toptron e10 and genero a iso std program (post demo) which is then customized and interwoven by the miller. normally it's okay but today a miller that uses selca cnc 3000 tells me not to be able to correctly read the g02 and g03 that are common interpolations on single blocks and that normally do not trouble. .

Can you give me some kind camouflage?

thanks dawdo

problems... of what kind?magari the centers of the arches are in absolute instead of in incremental or vice versa?

 

[david_67]

good morning thanks for the interest ... I carry under the beginning blocks program that contain the first g02 and g03, a roughing with spiral pasts with a ø10 plain:

%
O0100
♪
g90 g80 g00 g
g43 h01 z10. s2000 m03
g00 x-7.327 y336.747 z10. m09
Z1.02
g01 z0.02 f900
z-5.
x-7.074 y337.106
g02 x-5.096 y337.195 i1.024 j-0.726
g01 x-4.976 y337.026
x-4.889 y336.88
i4.914
g01 x-2.058 y334.578

I also read the original wild manual and it seems to me that these functions are covered. but they confirmed that he doesn't digest them. How do they replace?

Thank you in advance a greeting dawdo