repair copper pipe

[tecnico_plast]

I know what a risk of being a tick, but there are special sprays to test plant losses
and you will say... The good old soap works nicely! Why should I take chemicals?
Well... for a small experience I had, sprays "mark" smaller losses than those found with soap and water. . .

excellent information also this:smile:

 

[enri09]

from the photos you posted, that in question looks like a pipe filled, and should not break or clinch for a fold like that. Before breaking and welding joints, I would recommend a pressure test.

 

[tecnico_plast]

from the photos you posted, that in question looks like a pipe filled, and should not break or clinch for a fold like that. Before breaking and welding joints, I would recommend a pressure test.

Fortunately the pipe did not break, it was folded and there were no cracks or breaks.

tried with gas and has no losses, what luck :smile: