roof the wood... arduous enterprise?

[lmassimo79]

Good morning to all are at first weapons with revit... I should draw a 2-phalt wooden roof consisting of beams of doves, dots between doves and perimeter walls and coat of laminated cover (perline+ insulating+ strips + tiles). in my eyes drawing all this with revit seems arduous.... Can someone please tell me the simplest procedure to follow?

Thank you.

 

[gfrank]

draws the beam of dove
drawing the secondary beams (points) between the beam and the walls, one then duplicated for how many you need (matrix) or duplicated with copy
draws the roof with a layering composed of 3 layers:
- first starto = beads
- second layer = insulating (including strips), as normally the insulating goes to fill the space between the strips
- third layer = tiles
then do, if necessary, a particular of the roof (Detailview) in which you can insert the details of the cover .remember that is a view in 2 d and that you can also use dwg details, if you are not able to make/recover details in revit

if you want to do all the details in revit (in 3d), after secondary beams:
- each layer of the roof, drawings with the roof family, then a family for the axis (tect, wood material) and a second family for the insulating (tect, insulating material)
- the strips always draw them with a family of beams, which if they have the same thickness of the insulating you must place at the same quota (annegated) of the insulating
- the couplings with other roof family (couple material);
positioning all elements to the correct odds

 

[lmassimo79]

Thanks gfrank, so I design the pruning structure with the "structural" families and then the cover coat with the roof elements? And how do I put the guts?

I wanted to ask you another thing, in some previous post I read that nirvana had published a link where to download 4000 textures, materials, models... Since the link is no longer available, would you be so kind if you sent it with a private message?

thanks again and congratulations, I have read for months many of your interventions in the forum and are very interesting! Thank you!

 

[gfrank]

Thanks gfrank, so I design the pruning structure with the "structural" families and then the cover coat with the roof elements?

si

And how do I put the guts?

with the command: beginning > roof > > gutter

I wanted to ask you another thing, in some previous post I read that nirvana had published a link where to download 4000 textures, materials, models... as the link is no longer available, ...

http://www.cad3d.it/forum1/showthread.php?t=13444

thanks again and congratulations, I have read for months many of your interventions in the forum and are very interesting! Thank you!

grassie...grassie....:tongue: