serial fold radius: generates lap.

[graziano-g]

Hi, that's what happens to me, except he's no longer stunned than he seems. .
following this video tutorial:

at the minute 04:00 it is noted that in the last field of the first box the bending radius is indicated in 0.20 mm: unthinkable. . .
by updating this value to the minimum natural value, I think it is equal to the thickness of the sheet, two errors are generated (see image )
Likewise, the development is not real with consequent geometric problems of the finished piece, the placing on the table makes the radius set during the modeling which is unrealizable.
Any ideas or explanations?
Thank you.

 

[MassiVonWeizen]

the fold radius depends on the punch and can well be different from the thickness. there are, for example, punches with radius 1.5 for thicknesses of 4/5mm...
I'll watch the video later. if your is an exercise and there are no privacy issues posting the file makes it easier to understand the error

 

[graziano-g]

Of course, the radius can be different from the thickness but I don't think you can bend or better get a radius of 0.2 mm on a sheet of 1.5 if you don't want to challenge the bending.... .
attached the file, no privacy, I had not thought about it....
Thank you.
Bye.

 

[MassiVonWeizen]

I'm watching the video and shivering
if one has to do the tutorials should do them well
already the fact that hints at the possibility of making the hopper through surfaces is delirious, but adds that 'can be really laborious'... who comforts me
then as the loft does by selecting each sketch line with the region mode instead of directly selecting the sketch. then to match the development of the loft select the edges of the sketches concerned and these will be the control points of the loft.
Scake Sketches Surface (minute 1:53)
for those who are the first weapons is a delirium, one finds himself doing things without understanding why and what results it entails and the consequences of the various choices (in the loft did not specify that you have to scourge med body, banal, but not discounted.

However peer solve the problem, with 1mm radius, you have to change the laceration value and bring it higher than 3mm (straintly if you put 3.5 do not permete to perform the function). from what comes and how you calculate that value I have no idea.
increasing the radius also increases the minimum risk laceration value for development

 

[graziano-g]

Hi, I'm sorry I showed you things that lowered your temperature... .
I think that despite everything we can also consider this unusual as feddolosa road.
Thank you. :