• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

server e struttura pdmlink 9.1

  • Thread starter Thread starter goodwin
  • Start date Start date

goodwin

Guest
who explains me with a scheme or something like the server structure that requires pdmlink 9.1 is formed?
now we have intralink 3.4 and read on the internet that pdmlink 9.1 needs a database server, application server and cache server.... .
? ! ? !


Thank you all.
 
goodwin said:
who explains me with a scheme or something like the server structure that requires pdmlink 9.1 is formed?
now we have intralink 3.4 and read on the internet that pdmlink 9.1 needs a database server, application server and cache server.... .
? ! ? !


Thank you all.
Click to expand...
Hello goodwin,

the server can also be monolithic, the adoption of two servers is recommended when the number of users is high otherwise just one.

on the server then you can have x hd number, which separately manage the server database, application server and cache server for example:

3 hd running the application and vaults
2 hd running database and operating system

database: oracle or sql server
webserver and servlet engine: apache and tomcat

How come pdmlink 9.1 and not 10 if I can ask?

greetings
 
Thanks ozzy.
we will pass to 9.1 for "practical" reasons in the sense that a site of our company is already moving in that direction. . .
Can I ask you something? in pdmlink how is the management of cad files? I'll explain.
I can create a part named pippo.prt, a pippo.dwg design and a pippo.asm set? Can files have the same name? other thing: in the management of the workflow could be customized for example with a rule that, when a design passes from wip to released, is created a pdf file of the same?
Do you have any ideas?
 
goodwin said:
Thanks ozzy.
we will pass to 9.1 for "practical" reasons in the sense that a site of our company is already moving in that direction. . .
Can I ask you something? in pdmlink how is the management of cad files? I'll explain.
I can create a part named pippo.prt, a pippo.dwg design and a pippo.asm set? Can files have the same name? other thing: in the management of the workflow could be customized for example with a rule that, when a design passes from wip to released, is created a pdf file of the same?
Do you have any ideas?
Click to expand...
then you should ask the site of your company. :-)
you files may have the same name but clearly with different extension, so in your case it is fine being a part, a set and a design, equal as if you were in proe.

for the workflow absolutely yes, it is called passage of life cycle to depend on how it is set, does not physically create a pdf, in pdmlink are created in streaming, so at the time of change of state from wip to released you will appear pdf, usually use the watermarks to identify in what state a design is located, a beautiful writing in the center of the design to not use it as production so no one can pretend not to see it:
 
Thank you, Ozzy.
how is it called in English precisely?
is a function already integrated in pdmlink? where exactly do I find it?
What does it mean by streaming? we would need the creation of a pdf file to be stored in a network folder automatically.
Are watermarks also an integrated function and already available in pdmlink? Can you pass me some workflow screen that creates pdf and watermark? logically if you can without having confidential data... .
Thank you very much anyway.
 
careful not to make confusion I will try to explain myself better, I see that you have the ideas a little confused.
the state passage of the life cycle is an integral part of the change management system in English change managament.
the state of the life cycle of documents and with documents I mean both data cad and any other type, is regulated by international regulations, more precisely iso 11442.

a standard life cycle process is as follows:

1-in preparation course
2-in review course
3-approved
4-release
5-replaced
6-rite

windchill can manage up to 12 stages of life cycle and is fully customizable depending on the sector, if you work in medical for example you may be obliged to have more.
all this to tell you that there is no precise place to look for it, you set up in the admin environment when you define the business requirements in the phase of stacking the system.

pdfs created in streaming means that every time you open for example a windchill design, publishes in that instant the pdf, so there is no physical archive contenting all pdf files, this procedure is leaner and there is no risk that something is wrapped up, which instead happened in the old intralink, it is equally true that you can set again, but I disagree.
Finally, the watermarks are also integrated at the time of publication and also these depend on how the document lifecycle is configured.
I can't pass shielded, I have on a virtual windchill machine 10.0 which is quite different from 9.1, so it would make little sense.
but if a site of your company is moving in that direction, in theory it is that site that will take care of all this configuration, it is probably already doing it or nobody is following you and you are trying to configure it from you?
greetings ozzy
 
Thanks ozzy.
now we are installing the test environment with pdmlink 9.1.
is interesting the issue of pdf streaming. How can I prove it?
from what I understand, when you promote a design for example, is there a possibility to create a pdf streaming and possibly save it?
 
goodwin said:
Thanks ozzy.
now we are installing the test environment with pdmlink 9.1.
is interesting the issue of pdf streaming. How can I prove it?
from what I understand, when you promote a design for example, is there a possibility to create a pdf streaming and possibly save it?
Click to expand...
you must intervene and set the environment in the publication part.
the stream is automatically streamed, save it from the simple acrobat reader if you need to have it physically and send it to some customer or supplier.
 
hi parametric_ozzy,
I resume this discussion because I see you very prepared on the subject....:biggrin:

in practice I have to do the installation of pdmlink 10.2 on win server 2012 and as I arrived a series of dvd I wanted to understand if there is a particular sequence of installation.

Thank you.
bb








Parametric_Ozzy said:
Hello goodwin,

the server can also be monolithic, the adoption of two servers is recommended when the number of users is high otherwise just one.

on the server then you can have x hd number, which separately manage the server database, application server and cache server for example:

3 hd running the application and vaults
2 hd running database and operating system

database: oracle or sql server
webserver and servlet engine: apache and tomcat

How come pdmlink 9.1 and not 10 if I can ask?

greetings
Click to expand...
 
blubossa said:
hi parametric_ozzy,
I resume this discussion because I see you very prepared on the subject....:biggrin:

in practice I have to do the installation of pdmlink 10.2 on win server 2012 and as I arrived a series of dvd I wanted to understand if there is a particular sequence of installation.

Thank you.
bb
Click to expand...
the great ozzy from today stopped working in the plm...
But if you want to know something about machines, wine conservatives, lifts, magati will tell you.
Good luck! !
 
The_Matrix said:
ozzy no longer works in parametric suisse, but he did the "salto" and now works at a company that makes lifts and other machinery.
Click to expand...
Azz...

Well, I selfishly hope you don't abandon the whole forum, and you keep helping us out.
I join your luck!!!! :finger:
 
Good luck!
I also hope that you do not leave the forum, in any case you must continue:finger:

I hope that with time I can begin to give some advice on the pdm, for the moment I am zero.

Hi.
bb
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 2 (members: 0, guests: 2)
Back
Top