set custom layer

[Error404]

Good morning to all, I spent all morning looking for a guide without results.
work with inventor 2017, I don't mean too much of templates, libraries, contained centers, etc...
I had created a template in which I also changed the styles editing, I fixed all layers with thicknesses and colors as I had been requested.
the main problem is that when I go to create a table, once pulled inside the 3d piece automatically puts me the layers he wants.
Once I create a new table (using the template), I miss all the changes to the style editor. He uses the lines he wants.
I don't know exactly how to do:frown:
another problem (although irrelevant) is that I can't view edges in 3d, I went into options, I activated displays edges, I increased opacity, changed color, I changed the other settings in the tab "view", but nothing, always remain clear!!! the problem is that I'm the only designer in the office so I can't ask anyone else for help. Help me, please.

 

[Zac69]

you must have the project with the voice styles and norms set on reading-writing. made this laws here:http://help.autodesk.com/view/invntor/2016/ita/?guid=guid-d9480d26-df4f-47da-8ede-18c939690c9c

 

[Error404]

you must have the project with the voice styles and norms set on reading-writing. made this laws here:http://help.autodesk.com/view/invntor/2016/ita/?guid=guid-d9480d26-df4f-47da-8ede-18c939690c9c

Thank you, I managed to solve this morning after hours and hours of dismantling. the problem was that, I had the editing styles in writing alone:finger:

 

[deep70]

Hello everyone,
and for a long time I haven't put my hand at the "planet" templates of inventor 2016, now a new customer asks me to insert their own custom templates.
Tell me the correct way to do this? sincerely the last time I did there if I don't remember badly I also seemed quite complicted.

thanks to all in advance for the answers given and good day.

 

[Error404]

Hello everyone,
and for a long time I haven't put my hand at the "planet" templates of inventor 2016, now a new customer asks me to insert their own custom templates.
Tell me the correct way to do this? sincerely the last time I did there if I don't remember badly I also seemed quite complicted.

thanks to all in advance for the answers given and good day.

everything depends on its custom templates. You could pass the pack&go directly to get everything ready. Alternatively you have to make the tables from 0 and save the table as a model.

 

[deep70]

then in the email he writes to me:
in the "cloud" there are:
tampalte 2016
p&go axiemi and under assemblies + parts 3d.
Now I have not yet been able to verify if everything is already ready. .
in such case would just take, open the drawing file provided and proceed?

 

[Error404]

then in the email he writes to me:
in the "cloud" there are:
tampalte 2016
p&go axiemi and under assemblies + parts 3d.
Now I have not yet been able to verify if everything is already ready. .
in such case would just take, open the drawing file provided and proceed?

once you have the project folder (p&go) you will find subfolders (design date; libraries; templates; workspaces), a report document and perhaps a project file in .ipj format.
If the project file is not present, I suggest you create one from an inventor in the "workspace-> work area" folder.
once you get the project file you will already have ready some 3d models and assemblings (as he says from the email).
if you simply have to make tables you just open the 3d file to put in the table, create the new table and in the "drawing" section you should find the table ready with its cartiglio and everything. the file name depends on how he named it in .idw or .dwg format

 

[deep70]

thanks many gmontori, return and verify everything, in case of need I will return alive.
Thanks again many.